Wine Aerator 2.0 for wine bottles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own design of a wine aerator to insert into a wine bottle with non dripping top.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 206
- Wydruki
- 1
- Wyświetlenia
- 2073
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
My own design of a wine aerator to insert into a wine bottle with non dripping top.
This is a work in progress and i would like to get some feedback from you so i can improve it.
The prototype i have printed is in ABS plastic 1.75mm
And the gasket is printed in Ninja Flex 1.75mm
The aerator fitts al wine bottles with an opening betwin Ø17-21mm
If you dont have Ninjaflex
Try with O-Rings as gasket or maby a rubber band will work if you cut and glue them as O-Rings
Updates:
The new wine aerator have a better venturi function and a bigger air ventilation hole to increse the flowrate of the wine coming out of the bottle.
Print instructions
Category: Kitchen & Dining Instructions
Model is made in Autocad 2014
After some trail and errors i finaly have a working aerator working as i want it to.
I printed it with the top dripp free zoone down to the bed with support on 35° and 5mm brim
I found this was the best way to get it as smooth as bossible and to stick enogh to the bed so it wont fall down.