Wine Aerator 2.0 for wine bottles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My own design of a wine aerator to insert into a wine bottle with non dripping top.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 206
- Makes
- 1
- Views
- 2,073
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
My own design of a wine aerator to insert into a wine bottle with non dripping top.
This is a work in progress and i would like to get some feedback from you so i can improve it.
The prototype i have printed is in ABS plastic 1.75mm
And the gasket is printed in Ninja Flex 1.75mm
The aerator fitts al wine bottles with an opening betwin Ø17-21mm
If you dont have Ninjaflex
Try with O-Rings as gasket or maby a rubber band will work if you cut and glue them as O-Rings
Updates:
The new wine aerator have a better venturi function and a bigger air ventilation hole to increse the flowrate of the wine coming out of the bottle.
Print instructions
Category: Kitchen & Dining Instructions
Model is made in Autocad 2014
After some trail and errors i finaly have a working aerator working as i want it to.
I printed it with the top dripp free zoone down to the bed with support on 35° and 5mm brim
I found this was the best way to get it as smooth as bossible and to stick enogh to the bed so it wont fall down.