Graded Card Stand (PSA and CollectAura)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Show off your prized graded cards in style with this rotating display stand!
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 990
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to fit standard PSA and CollectAura graded card cases with sleeves (don't know if it works without), this model allows your collectible cards to spin smoothly on display – perfect for desks, shelves, or display cabinets.
There is 2 versions for the bottom , one where you can include a 608 bearing to mount the base and make it spin smoothly , the other one is fixed if you already have a turntable .
I have only tested the bearing version with 2 level , don't know if it still works great with more.
The top part is required regardless how many levels you intend to print
What you will need :
-Bottom (with or without bearing)
-Base (only if you print the version with bearing)
-608 bearing (only for the version with bearing)
-Top
-Junction (if you want to add a level , you can add multiple)
Printing :
Recommended layer height: 0.2 mm
Support needed only for the junction
Infill: 20% is sufficient
Orientation: As shown in the photos
Hope you like it :)