1 / 3
Anker 736 Charger & Cord Magnetic Travel Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little box to hold the 100W Anker 736 Charger and 10+ft worth of cord! Small holes are included for magnets.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A travel box I made to hold an Anker 736 and cords for your devices. The model has holes in the lid and ‘support pegs’ for 6x2mm magnets to be glued in. You can also just throw a rubber band around it too.
I'd recommend printing with solid infill or at least 3 top and bottom layers and 50%+ infill. Definitely use a good PLA+ like 3DFuel Pro PLA+ since the walls are pretty thin. Has held up for 2+ years for me!