1 / 7
1kg Spool Holder for 2020 Frame i3 Bedslinger (Enders, Kobras, Neptunes) — zdjęcie 1
1 / 7

1kg Spool Holder for 2020 Frame i3 Bedslinger (Enders, Kobras, Neptunes)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple and easy to print. No support needed

Ocena
0 / 5
Polubienia
10
Pobrania
42
Wydruki
1
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Lay it flat to ensure the strongest print and eliminate the need for supports.

I used PLA, and it worked well. However, PETG or ABS would likely perform even better.

You'll need three T-nuts for 2020 extrusions, along with three M5 15mm screws and three washers.

I used M6 nuts as washers and M5 20mm screws because I ran out of M5 washers. 😂

Tagi