Garant Residential lawn roller plug/drain port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garant Residential lawn roller plug/drain port
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Garant Residential lawn roller plug/drain port.
I needed a lawn roller, and a friend had one but was missing the plug.
Designed this model to be used with 13/16" to 7/8"rubber O-ring with 1/8" thickness. This was from a general O-ring kit of multiple sizes. The O-ring stretched enough over the threads and kept the roller sealed. From a picture it looks like the original part uses a flat rubber ring. I believe the threading was 15/16" - 14. The inner hole measured about 22mm in my initial measurements. It was then tested through a few iterations to get the final part.
Made 3 different models:
-Slot to be used with a coin. This was good for testing but found the next two much more reliable.
-3/8" allen key
-10mm allen key
I do recommend using a wire brush to clean the threads before installing.
Printed it PLA 4 walls, 5 top/bottom, 40% Gyroid, at 0.2-layer height. Probably best to print in PETG or ABS/ASA if being stored outside.