Garant Residential lawn roller plug/drain port
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Garant Residential lawn roller plug/drain port
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Garant Residential lawn roller plug/drain port.
I needed a lawn roller, and a friend had one but was missing the plug.
Designed this model to be used with 13/16" to 7/8"rubber O-ring with 1/8" thickness. This was from a general O-ring kit of multiple sizes. The O-ring stretched enough over the threads and kept the roller sealed. From a picture it looks like the original part uses a flat rubber ring. I believe the threading was 15/16" - 14. The inner hole measured about 22mm in my initial measurements. It was then tested through a few iterations to get the final part.
Made 3 different models:
-Slot to be used with a coin. This was good for testing but found the next two much more reliable.
-3/8" allen key
-10mm allen key
I do recommend using a wire brush to clean the threads before installing.
Printed it PLA 4 walls, 5 top/bottom, 40% Gyroid, at 0.2-layer height. Probably best to print in PETG or ABS/ASA if being stored outside.