OXVA Xlim GO TPU/TPE case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case for OXVA Xlim GO pod system mean to be printed with flexible filament, like TPU/TPE/Flex.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 854
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DISCLAIMER: I spent quite some time in trial&error to make this case fit as perfect as possible. But I can not guarantee, that with different printer and/or filament you will get perfect results out of the box, so be ready that you may need to scale it a tiniest bit, and do some tests until it fits.
There are two models - one is full case, and another is for wearing it on a strap, both with a cap. Make sure to calibrate printer for filament, since flexible filaments can be pretty tricky to print. Try going with very low speed (I recommend not more than 20-30 mm/s). Good luck!