Liczymy pasujące modele…
I lost my adapterplate for my old tripod. Before throwing the tripod away, I started to experiment with OpenSCAD and it turned out to be pretty usable. With the included OpenSCAD-files you can design an adaptermount for your own tripod.…
Keeps an AirPods Pro case closed so that the buds don't go flying any time you drop it. Can be easily opened with one hand. Don't mind the terrible layer lines in the photos, I didn't realize my printer was that badly set up!
Description I created this Rugged Case so I could just toss my Airpods in my bag. I needed them to be tough. This case was designed for Apple Airpod Pros 1, but will work with Pros 2 - as I just learned. I created the case with the help…
Just print it on its side with the carabiner hole facing down. No supports needed. Tested with PLA and PETG. Works fine with both. PLA is a little stiffer tho. Have fun with it :)
The original case but with a loop
Do you have a rectangular switch, gauge, or display you want to mount in your car, but no convenient place to mount it on the dashboard? Did you cut a hole in the plastic dash only to realize like an idiot that there was metal structure…
English Pixie Crew brand pixels compatible pad in various sizes: 6x6, 8x8, 10x10, 12x12, 6x12 I made these for my kids because we had some leftover pixels / studs. This brand makes special pencil cases, school bags that have silicone pads…
While I love making camera-specific bottom plates and really tiny options to keep in my bag, I've been meaning to make some 'big' versions for a while. These ended up still being quite a bit smaller than my favorite 'real product' arca…
Style meets functionality with Hexo Pod desk organizers. Intended to keep your desk space clutter-free and organized to decrease annoyances and increase productivity! All of the parts fit together so that you can customize the size and…
Usage of old Seal: → Pull out rubber seal from broken cap with tweezers, cut off the upper part to a hight of 3mm (right between the bottom and the first edge) to get a new fitting seal. The seal will generate tension on the notches → no…
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
Remixed the quick release holder into a wall mount that can use double sided tape or screws.
Ever wanted your iPod mini to be USB-C? Fret not! This case lets you do that without modifying the iPod in any way. You just need an old 30 pin cable and a USB-C female port (like this one for example:…
Optimize your setup with the HomePod Mini TV/Monitor Mount, a sleek, easy-to-install 3D-printable holder designed to securely attach to the back of your TV or monitor. This mount allows you to keep your Apple HomePod Mini close by without…
ALL the Galastropods from SystemEra's Astroneer, including EVA! I extracted these models from the game, cleaned up, repaired, smoothed the texture, and made printable. Enjoy! Sylvie Usagi Stilgar Princess Rogal Bestefar Enoki
Simple case for 2x Uwell Caliburn X Pod. Glue 6x2mm magnets into the holes. If the pods are little bit loose in the case, you can simply add some layers of transparent tape to both parts of case.
An extension to mount a 13" IPAD on the Joby Grip Tight Pro tripod mount. To install remove the two visible screws on the mount plate and replace base with printed part. Layer height 0.15mm Infill 15% Perimeters: 3 No Supports
There is an update version of this model: Flat-Edged AirPods Pro (2) Case 2.0 Printable case for Apple AirPods Pro with flat edges. I've designed two versions, one for the AirPods Pro and one AirPods Pro 2 case. Their dimensions are…
Description This is a remix of two models - both of which have been modified. Model one is the 3D printable case for the OpenMV Cam RT1062 V4; model two is the Bendy Phone Tripod and Stabilizer. The result is a cam case with an embedded,…
Suport per a càmera Sentry Adaptador per a rosca de tripode estàndard Rosca 1/4 Soporte para camara Sentry Adaptador para rosca de tripode estandar Rosca 1/4
Petg, Plasty Mladec, Blue, nozzle 0,4 mm, MK4 Prusa
Remix to fit these cheap aliexpress bluetooth sensors
You can get very inexpensive wireless charging boards from Ali Express that work just fine with apple products. It might not be as fast as the expensive Apple one, but they work exactly the same way. The disk slides into the charging…
Got a Philips series 8000 wet and dry shaver. The bundle didnt include the quick clean pod. The original is just a bowl with lid and otherwise empty, no function at all for the money they ask for. The cartridges with their secret cleaning…
Keeps an AirPods Pro case closed so that the buds don't go flying any time you drop it. Can be easily opened with one hand. Don't mind the terrible layer lines in the photos, I didn't realize my printer was that badly set up!
This canopy has been redesigned to accept a Flywoo 40A AIO, as well as a GPS (or a vifly mini buzzer if you prefer)
This is a simple and functional 3D-printed holder designed specifically for the ZWO AM3, AM5, and AM5N hand controllers. The holder attaches securely to tripod legs with a 4 cm diameter, with a 38 mm inner diameter ensuring a snug and…
This adapter allows you to mount a sliding GoPro plate to a tripod with a captive nut. Recommend printing at a bit higher resolution (<0.20mm/layer) than you normally would, in order for the GoPro plate to print nicely at an angle. I used…
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
Since the RinseKit Pod is an older discontinued model, I thought it would be worthwhile sharing an end cap in case someone were to lose or break their original. This does require you to use the O-ring that comes with it. From a quick…
All credit goes to @755123BE for the original design. Just like the original, these covers are designed to be used with “ AeroGarden Seed Pod->Shrouded ”. The original works great and are still my go to when starting out, but as my plants…
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
A nice Flowerpot podest Whatever you think of it ,as it is.
Heart pendant, to share with another person. You can add an inscription in the slicer. Zawieszka serce, do podziału z drugą osobą. W slicerze można dorobić napis.
Podtácek velikonoční + stojan. Easter coaster + stand. Nožičky podtácků jsem tiskl z TPU filament aby to neklouzalo po stole. I printed the feet of the coasters from TPU filament so that it does not slide on the table. Pokud se ti model…
This Apple Watch conversion kit turns a 5e 40mm apple watch into an IPod like device. You can use it to play music, read notifications, respond to some messages, and much more. This was designed specifically for the 5e 40mm, but may work…
As a keen wildlife photographer I like to get low to my subjects. Normally I shoot handheld or on a beanbag but sometime I need something more stable. Like many my first ground pod was an old frying pan. But they just rust very quickly. I…
EN:Store your pods with ease. The attachment can be done with a hook (which won't damage your stand) or with screws. If you prefer, you can customize the attachment with a generic 3D model provided to add a magnet, for example. You can…
" This is a tweak on ALR's excellent design so you don't need to buy new bolts but can use the bolts already in the Pixie Nespresso machine. It's otherwise the same, you slide capsules to the top where it's a little wider so you can get…
Clamp made to connect to a pop-up tent and hold a monopod. Specifically sized for 1-1/8" square tent leg (e.g. most EZ-UP tents) and this monopod: https://www.amazon.com/dp/B09J7WMMXV Could be used to hold a camera or any other accessory…
Vrstva 0,16mm, 45% výplně, materiál ASA. 6mm vratový šroub, pružina, podložka a křídlová matice. _______ Layer 0.16mm, 45% infill, ASA material. 6mm gate bolt, spring, washer and wing nut.
Honeycomb wall compatible holder for airpod pro case with integrated charging cable. Designed with the dimensions for my USBc to lightning cable. Cable slots in upward from the bottom through an oversized hole, then press fits downward…
Just print it on its side with the carabiner hole facing down. No supports needed. Tested with PLA and PETG. Works fine with both. PLA is a little stiffer tho. Have fun with it :)
We designed this to mount cell phones of any size to camera tripods, even if you have a phone case and a pop socket attached. The best part is that it is almost 100% 3d printed! You just need a 1/4"-20 hex nut and, optionally, two short…
Ham radio operators have long used surplus military masts for temporary antenna or light supports for Field Day and other activities. They are easy to put up, rugged and transportable. Masts are typically four (4) foot in length sections,…
Hi I made this stand for my iPod Nano 4th where you can charge it also. Enjoy ;)
This is a GoPro mount designed for the Gear Photo Tripod by Thorin Oakenshield , with many thanks for the great original design. It replaces the standard 1/4 thread screw part. Required other than printed parts: 1x M5 Nut Print settings:…
Pièce conçue pour remplacer le support de maintien d’origine du SteamPod (fer à lisser vapeur), fourni avec le modèle vertical. Elle se fixe directement sur un cintre en bois à l’aide de deux vis. Idéal pour retrouver une solution…
This is a camera mount to enable you to put your Chuzhao TLR digital camera onto a tripod. Yes it is silly, yes it is pointless but it does add a bit of extra something to this toy of the camera. to make this mount you will need a 3/8-16…
I bought some nice speakers for my wife's 2002 Jeep and after stuffing them in the dashboard with a variant of the brackets around I decided that it didn't sound as good as it could. I couldn't find anything like this (maybe that is for a…
This is a tripod for e.g. the Insta360 invisible selfie stick or any other camera mount with a standard ¼ inch screw mount. It's a remix of @OurAngryBadger very good remix. Required Parts 3× M3x16mm screws 3× M3 nut 1× ¼ inch screw,…
So I made the original just as a replacement. This integrates 52mm gauges similar to the Monaro's optional gauge pod, and the wonderful aftermarket ones that are admittedly a little pricey. Print with something UV and heat resistant. Also…
The fan slides in from the top and sits in there by gravity and friction. There is a hole for the cable at the bottom. It's possible to print the thread but you better recut it afterwards. I use it for cooling my head during flightsimming.
A minimalistic 3D-printed charging dock designed for Apple AirPods with a Lightning connector . Features Compatible with the official Apple Lightning cable Clean, minimal design Clever cable integration to secure the connector in place…
This Keurig pod tray was originally designed for use in the draw of an Ikea FÖRHÖJA
Airpods top part of the case with the ability to stick to the original case without any glue or duct tape. Though the ledge itself is kinda fragile (since it has to be very thin) it is still reliable if you are not to take it off the…
Airpods pro bottom part of the case with circled form of the holes.
Vertical angle tightener spare part for Hama Star 75 tripod (the one printed white in the photos). This part often breaks when tightened too firmly. I printed the part on MK3S+ with PETG 0,2 mm QUALITY with 4 perimeters and organic…
Die Conqueco Espressomaschine ist toll, aber der Ständer dafür ist derzeit vergriffen (und teuer). Fusion-datei ist hier dabei, wer es aber gleich drucken will, findet alles was er für Prusa braucht. Ich habe ihn in PETG gedruckt in der…
A glorious display stand for your Benchy, made out of Benchys.
Designed for Eclipson Hushwing , but should fit many similarly sized models. Fits Caddx Ant Nano camera, HGLRC Zeus Nano FPV transmitter and maximum 4.5 mm diameter antenna for cheap (~$35) and lightweight (~10 g) FPV setup. The camera is…
my qavx realacc version race pod weighing 21grams and holds runcam micro version 1-3 at a 35 degree angle. the rear mount will hold an rxsr and TBS unify style vtx antenna. you don't need to use the rear mount this will bolt right up to…
I loved the design from imurfathersimba, but unfortunately, the iPhone 13 mini did not fit on it cause of the camera bump distance. So I used some design cues and redesigned it to fit my needs. I also added a spot at the bottom to hold…
Print all parts in the stiffest material possible. ABS, PETG, or PLA will likely be OK for light loads, but fiber-reinforced material (nylon, etc) is strongly recommended for any serious use. I used Polymaker glass fiber-reinforced nylon…
Left hand and right hand configuration of my AirPod holder for the Med-El CI processor. I'm SSD, so use one of these to hold my Airpod up to the microphone input on my Rondo 3, and have the other AirPod in my “good” ear. Means I can…
I needed a way to hold my Anker PowerBank onto my tripod that wasn't zip ties while I record 4k60fps soccer matches. My phone would regularly go from 100% to 5% during a single match, often times i would lose the footage if it died before…
I just changed the base to allow the screw/bolt to be screwed into place. I also made a recess in the base to hide the screw/bolt head. Use the original feet from the original model.
6.5" Speaker pods that mount under the dash of a TXT, used Jack nuts to secure them Prints with no supports
TRIPOD candle holder i designed:) suitable for around 35-40mm candles i think that it looks cool i printed with no supports using led candles recommended don't forget to like:)
Mount for the Insta360 Go Ultra Camera Pod. Attributes: Securely holds camera pod to be mounted to GoPro style mounts Side opening allows for Large USB-C cable to be inserted Side opening allows for camera release button to be pushed Side…
Print any of the elbows with supports, Iv found that tree supports work the best. Iv printed these out of sunlu matte high speed petg. Print the sleaves out of TPU with supports.
I am an old Star Wars fan that always has loved the YT-1300 model, but I never feel the movies evolved from the original design. I like a cleaner “non piece of junk” design. This model has not been cut out for printing yet.
This case fits the iPod 4th Generation 20GB, IT WILL NOT WORK ON THE 40GB MODEL. This case will hold itself together, but is easy to take apart. This case can be glued together by putting glue into the small holes in the front of the…
AirPods Pro 3 case Included are fully editable: Fusion 360 model .f3d full AirPods Pro 3 Cutter model (negative for cutting new cases) Enjoy!
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
Bracket to hold an iPad in landscape orientation with holes to take headphones, and clamped directly into a tripod that takes a wedge mount. This mount doesn't come up high enough to block the charging hole. Based on my previous…
This is a minimalist stand designed specifically for the Apple HomePod Mini. It raises the speaker slightly from the surface, giving it a stable base, and a subtle design touch that fits into any modern workspace or living room. Features…
This is a simple 3 part container for my mini13 Helldiver so they dont get lost
Model formule pro podvozek Ites ITL 010. Podvozek je vhodný pro českou autodráhu Ites, dříve známou také jako FARO, Gonio nebo EuropaCup. Podvozek ale spolehlivě jezdí i na jiných konkurenčních dráhách. Unikátnost podvozku je v jeho…
Tripod for field use, with rail adapters on the legs to attach various accessories. More to come. Rails attach with M3x8 with M3x5.7 insert. center post standard camera mount 5/8" length, 1/4x20thread.
This is a printable case for the AirPods 3. It features cutouts for the charge port, setup button and indicator light. The case should stay on without any need for glue or double sided tape and also supports wireless charging. Printing…
Cover - protection case for Lion Pod (Tabaccheria - Hellvape) I hope you enjoy
Mat for a gymnastic ball with a diameter of 65cm. Podložka pod gymnastický balón o průměru 65cm.
I made this 3D model so I can use my Aerogarden pods in a “modified” Click and Grow to make it hydroponic. The tab mimics the original Click and Grow design, and you can attach a label to it to identify the plant! No support needed!
Made this because the 3/8" thread standard used by other mic stands is too flimsy for 3d-printed threads (in my experience). Most US mic mounts have a 5/8" thread with a 3/8" adapter that you can remove. Print upright without supports but…
AirPods Pro Couch Stand – 3D Printable Holder This AirPods Pro Couch Stand is a fun and functional holder designed to keep your AirPods Pro safe and accessible. Shaped like a miniature couch, it adds a playful touch to your desk,…
O VO JE PODVOZJE GDJE TREBATE SAMO OSOVINSKI SKLOP (4KS/VAGON) I NEM SPOJNI UREĐAJ (2KS/VAGON) . L AKO ZA ISPIS-BEZ SUPPORTA. O SOVINSKI SKLOP IDEALNO 8,3MM. N AJBOLJE RADI KAD VAGON IMA NETO KOLIČINU 50G. IMAJTE SREĆU SA ISPISOM!
This bracket holds the Hubble Optics artificial star and mounts it to a standard 1/4"-20 tripod screw mount. The laser uses a vixen dovetail bracket that mounts to the bottom vixen rail of an SCT. The laser is used solely to point the OTA…
This tool will help you remove AirPods and many other brands of earbud cases from a protective case.
