Starlink Mini Pole Mount To Tripod Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to use the pole mount provided with the Starlink Mini and attached to the top of a photo tripod.
- Ocena
- 4,5 / 5
- Polubienia
- 155
- Pobrania
- 1760
- Wydruki
- 5
- Wyświetlenia
- 9195
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter I designed to fit in the pole mount that comes with the Starlink Mini that has a ¼-20 thread insert in it to attach to any tripod or other camera mount (ie clamps, suction cups, really anything that uses a ¼-20 screw).
I printed this out of PET-CF for its strength and temperature resistance but any filament should work, I would recommend 6 wall loops and around 25% infill. No Support needed.
The threaded insert I used is a Ruthex ¼-20 (https://www.3djake.com/ruthex/threaded-inserts-1-4-20-pieces) but any ¼-20 insert with roughly a 8mm outside diameter should work.
I have uploaded a version with no hole to be used as a model to make any other mount off of, its basically just the cup that fits in the pole mount.