Starlink Mini Pole Mount To Tripod Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter to use the pole mount provided with the Starlink Mini and attached to the top of a photo tripod.
- Rating
- 4.5 / 5
- Likes
- 155
- Downloads
- 1,760
- Makes
- 5
- Views
- 9,195
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is an adapter I designed to fit in the pole mount that comes with the Starlink Mini that has a ¼-20 thread insert in it to attach to any tripod or other camera mount (ie clamps, suction cups, really anything that uses a ¼-20 screw).
I printed this out of PET-CF for its strength and temperature resistance but any filament should work, I would recommend 6 wall loops and around 25% infill. No Support needed.
The threaded insert I used is a Ruthex ¼-20 (https://www.3djake.com/ruthex/threaded-inserts-1-4-20-pieces) but any ¼-20 insert with roughly a 8mm outside diameter should work.
I have uploaded a version with no hole to be used as a model to make any other mount off of, its basically just the cup that fits in the pole mount.