Fantastic Factories Vitamins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vitamin tokens for the "Manufactions" expansion for Fantastic Factories.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Vitamin tokens for the "Manufactions" expansion for Fantastic Factories: https://boardgamegeek.com/boardgameexpansion/319035/fantastic-factories-manufactions
For each vitamin, print two "caps" in different colors (e.g. red and blue), and print one "core" in a third color (e.g. grey). Apply a drop or two of Cyanoacrylate (Krazy Glue, Gorilla Glue, etc.) to the ends of the core, and stick the two caps on.
Print Settings
Printer: Anycubic Mega-S
Supports: No
Resolution: 0.1mm
Infill: 0%
Notes:
I printed with a 0.1mm layer height because I wanted them to look smooth. You could get away with 0.15mm or even 0.2mm I suspect.
Since there's not a lot of surface area in contact with the print bed, I used a brim to keep the small pieces anchored (see slicer screenshot). I adjusted the "brim separation gap" to 0.2mm in PrusaSlicer so that the brim would be easy to remove.