Fantastic Factories Vitamins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vitamin tokens for the "Manufactions" expansion for Fantastic Factories.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 43
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Vitamin tokens for the "Manufactions" expansion for Fantastic Factories: https://boardgamegeek.com/boardgameexpansion/319035/fantastic-factories-manufactions
For each vitamin, print two "caps" in different colors (e.g. red and blue), and print one "core" in a third color (e.g. grey). Apply a drop or two of Cyanoacrylate (Krazy Glue, Gorilla Glue, etc.) to the ends of the core, and stick the two caps on.
Print Settings
Printer: Anycubic Mega-S
Supports: No
Resolution: 0.1mm
Infill: 0%
Notes:
I printed with a 0.1mm layer height because I wanted them to look smooth. You could get away with 0.15mm or even 0.2mm I suspect.
Since there's not a lot of surface area in contact with the print bed, I used a brim to keep the small pieces anchored (see slicer screenshot). I adjusted the "brim separation gap" to 0.2mm in PrusaSlicer so that the brim would be easy to remove.