Angry Clippy with Sticky Note Pad base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's Clippy but angrier (or most likely just really, really disappointed in you)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After years of being ignored and pushed to the side for being “annoying” Clippy got a little surly over the years. Angry Clippy now available in 3D-printable form to remind you that your work is trash and no one in the office cares for your terrible jokes. It's designed to hold standard 3"x3" sticky notes or note pads, perfect to send passive-aggressive notes to remind Steve not to use the office microwave to heat up his fish for lunch…again.
Angry Clippy and the notepad base also have spaces to hold 8mm x 2mm magnets (optional).
Designed to be printed on the Prusa MMU system. You can print Clippy up to 0.28mm layer height on a 0.4mm nozzle, but I suggest 100% infill and 3 perimeters for added rigidness.
The base can be printed with 2 perimeters in 15% infill.
As I do not claim to own the rights to Clippy or components of Microsoft, this model is not meant for commercial distribution. I also cannot be held responsible for any missing items on your desk that Angry Clippy may or may not have “misplaced”.