1 / 2
HueForge - Dhalia -Flower — zdjęcie 1
1 / 2

HueForge - Dhalia -Flower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a cute dhalia flower

Ocena
0 / 5
Polubienia
11
Pobrania
39
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The original photo is from “Athena Mckinzie” here's her profile;

https://fineartamerica.com/profiles/athena-mckinzie


Print at 100% infill with a layer height of 0.08/0.1mm with a base layer of 0.08/0.1mm

 

The Model is 200x152.67mm in size
 

Filaments Used:
PLA BambuLab Matte Black
PLA SmartMaterials PASTEL Mint
PLA BambuLab Basic Jade White


This print uses 3 unique filaments

Swap Instructions with 0.1mm height:
Start with Black
At layer #6 (0.60mm) swap to Grass Green
At layer #8 (0.8mm) swap to Jade White for the rest

Swap Instructions with 0.08mm height:
Start with Black
At layer #6 (0.56mm) swap to Grass Green
At layer #9 (0.8mm) swap to Jade White for the rest

 

There's a gcode with manual stops made for printers without color changer like an MK3s+

Tagi