Fiber Diz, 3mm, 5mm, 7mm: no supports required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place concave fiber diz that requires no supports. Print flat side down on build plate. Holes are 3, 5, and 7mm
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in place concave fiber diz that requires no supports. Print flat side down on the build plate. Holes are 3, 5, and 7mm.
Print 0.1mm layer lines. with a 0.4mm nozzle. I'd recommend using a deburring tool in the two larger holes to clean up any minor imperfections in the filament output, and then some 220 grit or 320 grit sand paper in the holes to finish.
If you have a lathe, you can print the “thickwalls” variation and sand off the plate-side corners, layer lines, etc, but it's not necessary if your print quality is good.
Photo includes a solid bocote wood diz I made on the drill press and lathe. Happy printing!