Fiber Diz, 3mm, 5mm, 7mm: no supports required
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place concave fiber diz that requires no supports. Print flat side down on build plate. Holes are 3, 5, and 7mm
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 105
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Print in place concave fiber diz that requires no supports. Print flat side down on the build plate. Holes are 3, 5, and 7mm.
Print 0.1mm layer lines. with a 0.4mm nozzle. I'd recommend using a deburring tool in the two larger holes to clean up any minor imperfections in the filament output, and then some 220 grit or 320 grit sand paper in the holes to finish.
If you have a lathe, you can print the “thickwalls” variation and sand off the plate-side corners, layer lines, etc, but it's not necessary if your print quality is good.
Photo includes a solid bocote wood diz I made on the drill press and lathe. Happy printing!