Linear Rail Spacer Set for Ender 3 S1 / S1 Pro (MGN12H Upgrade)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lifts up the frame to make space for linear rail carriages
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Linear Rail Spacer Set for Ender 3 S1 / S1 Pro (MGN12H Upgrade)
Upgrading your Ender 3 S1 or S1 Pro to MGN12H linear rails? You’ll likely run into clearance issues where the rail carriages collide with a raised section of the lower chassis beneath the Y-axis 20x40 extrusion. This spacer set solves that problem cleanly and efficiently.
This model includes two spacer plates — one for the middle and one for the front — designed to fit between the chassis and the 20x40mm Y-axis extrusion. By raising the extrusion slightly, these spacers create enough clearance for the MGN12H carriages to slide smoothly without interference.
- Uses the existing mounting holes — no modifications required
- Printed spacers ensure consistent spacing and easy installation
- Designed specifically for the Ender 3 S1 and S1 Pro
Tested for fit and function — a must-have mod for a proper linear rail upgrade.
Theres 2 types, 4.5mm & 6.5mm thickness and additionally I’ve given you the STEP to adjust freely.