1 / 5

Voron V0.2r1 Crown Idlers

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a modified set of OEM idlers, these have location tabs to ensure you top hat is held more securely in the correct place

Aktualizacja u źródła: 12 maj 2025

Informacje o modelu

Voron V0.2r1 Idler Crowns!

This simple mod incorporates a few small but mighty features.

crown on the top part align the top hat extrusion and hold them in place when the cam lock is engaged
alignment nub added to upper Y extrusion location to aid frame alignment
corner relief added to upper part for upper Y extrusion
key added to bottom part to aid alignment of top / bottom parts

no other changes have been made to these parts to ensure full compatability, so these can be swapped straight in with no fuss or worry!

all parts have been pre-laid on a V0 bed for easy printing!

please follow the Voron Print Settings as per the norms

4 perimeters

5 top / bottom layers

40% infill

0.2mm layers

feedback is always welcome

if you like my work, consider buying me a ko-fi

https://ko-fi.com/driftrotor