Damper mount for Kugoo Kirin G1 pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Damper mount for Kugoo Kirin G1 pro
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Print using PA-CF or PA-GF with at least 5–7 walls and 35–40% gyroid infill.
Print the front part without supports—it is designed with sacrificial layers.
Print the back part with supports, using the orientation shown in the orca screenshot (layer lines have to be like this).
(BOM):
2 × M3 heat-set inserts
2 × M3 DIN 912 bolts
2 × M8 DIN 912 half-threaded bolts
2 × M8 nuts
1 × M8×30 DIN 912 bolt
1 × GB96-85 washer (M8×22×2 mm)
2 × M6×16 DIN 7420 bolts
Epoxy
370 mm damper
Insert the M3 heat-set inserts into the back mount. Apply epoxy along the entire length of the two M3 bolts and screw them in tightly. This will create preload and improve the part’s strength.
To mount it, use the M8×30 bolt and the GB96-85 washer. On the scooter, you’ll need to unscrew only the central bolt of the deck. You will also need to trim a small piece of plastic and aluminum from the scooter.
To mount the front part, use two M6×16 bolts.