Liczymy pasujące modele…
Zpevnění pro Kugoo Kirin pro 2021. Pro řídící tyče 60 x 37mm. Tisknuto PETG s výplní min 30% a 10 perimetrů. Logo na vsazení do záslepů tu mám taky.
Pedana per monopattino Kugoo M4pro con triplice funzione di poggia piede, maniglia per sollevare il monopattino e contenitore per l'allarme. Doppio punto di fissaggio; Alla pedana ed agli ammortizzatori. Da stampare in PETG - ABS - ASA…
Rear extension fender designed for the KUGOO Kirin G2 New (2024/2025) electric scooter. This 3D-printable part provides extra protection against dirt, dust, and water splashes coming from the rear wheel. The model has a reinforced…
dysza 0.4 warstwa 0.2
For Kugoo F3 pro max
When my daughter asks to take her for a ride on an electric scooter, she was not quite comfortable and she could fall from any maneuver. therefore, I designed additional handles that turned out to be quite strong and now she is happy to…
I've installed a 125mm shock absorbers and original kickstand became useless because of increased clearance. Warning! It's pretty fragile, consider another solution. Some examples here: https://electro.club/m/183820 My own suggestion:…
Nozzle 0.6 layer 0.28
Pouzdra pro snížení vůle šroubů předních tlumíčů
handle protection for kugoo s3 and some other scooters and bikes
Logo k vytištění ze 2 barev Kugoo Kirin. Na zpevnění, které jsem tu také vložil, lze jen vsadit, drží i bez lepení. Přívěšek na klíč Kugoo Tisk PLA
This part is a bit wider than the original Kugoo shockarm cover and should stay inplace without any glue as opposed to the original one. I printed it from ASA to tackle weather conditions but the filament choice is up to you. The original…
Designed for these turn signals: https://aliexpress.ru/item/4000433048492.html Also check out rear turn signals mount: https://www.printables.com/model/463334
PET-G, infil 100%, it is necessary to work with the temperature so that the lower collar does not become numb....
Print using PA-CF or PA-GF with at least 5–7 walls and 35–40% gyroid infill. Print the front part without supports—it is designed with sacrificial layers. Print the back part with supports, using the orientation shown in the orca…
Mounted on this: https://electro.club/m/155913 For these turn signals: https://aliexpress.ru/item/4000433048492.html Print two copies (one mirrored). Use M8x30 (or longer) screws. Fix turn signals using cable ties. Also check out front…
Sun cover for the display of the Kugoo F4 / F3 Солнцезащитный козырек для дисплея Kugoo F4 / F3
This model was designed to replace the front reflector mount of the Kugoo Kirin M3 scooter so that an Apple Airtag can be hidden inside it. You can use the original screws and the original reflector with this new mount.
KUGOO M4 PRO Upgrade electric scooter KUGOO M4 PRO Upgrade elektrickej kolobežky
крюк для сумок на электросамокат, требуются 2 винта м3 с гайками для крепления, длина от 2см
To connect the two parts on the scooter rack, 2 screws and 2 nuts are required, printed with 4 walls with a filling of 25%
Scooter controller cover with charging port suitable for Kugoo S1/S2/S3.
Be sure to turn the model upside down with a hole, using post-processing add a pause until the layer where the handle cover will close, I have it at 37th layer with a layer height of 0.2, put our nut there, which will seal inside the part…
Kugoo M4 headlight mount Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 100 Filament: Geek filament PLA Gray Category: Other
My scooter's rear wheel caps are broken. I thought that with what glue you can make your own. I took the model as a basis https://www.thingiverse.com/thing:4973080 but there are completely different sizes, but the shape suited me. I…
KUGOO KIRIN M4 PRO steering bushing for the 2023 model. The steering bushing broke, causing play to appear. I took the measurements myself. Now there is no need to go for service.
