BK1s Replacement Stock Attachment Lugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Did the stock lugs on your BK1s or BK2s shear off? Here is the part to fix that! Print, install, and fling some foam!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The BK1s is a great AEB and great blaster overall, with one extremely annoying flaw: the extremely fragile stock lugs. The thin plastic of the BK shell and the high stresses at the small stock attachment lugs usually cause them to shear completely off after a while, and if they do shear off, you're screwed, as there is now no way to attach your stock to the blaster. But never fear, this is the part that fixes just that! Simply print this, remove the stock spring retainer, and replace it with this part, and you will be able to mount your stock again! BTW, the slot is a wiring pass-through.
I have tested this heavily for durability, including firing over 500 darts, swinging around the blaster by the stock, and even dropping the blaster on the stock at an angle. This part has held up through it all. If you manage to break it, congrats! Just print another one, and you'll be back flinging foam in no time.
3D PRINTING
Print it in the supplied orientation at 100% infill and at least 8 walls. The stronger the filament or material you use, the better; you obviously don't want it to fail (again). Something like nylon CF would probably be optimal, but even PLA probably would last a while. This print only takes about an hour and 10g of filament when printed on a Bambu P1S, so if it does break its not that big a deal. I recommend using tree supports to support the locking lugs, as seen in this screenshot:
SUGGESTIONS, QUESTIONS, OR ISSUES? CONTACT ME!
I can be found on Reddit and Discord, but I am most active on Discord. I can be found on the /r/Nerf Discord server, but if you need, you can DM me. If you do make this blaster, I'd love to know!
My Discord username is: @brooklyn_tony198
My Reddit username is: u/BrooklynTony198
Please note that I will generally not be accepting friend requests for DMs; to DM me on Discord, please join the /r/Nerf Discord server first and DM me through there.
NONE of my files are to be used or sold by Frontline Foam, by downloading my files, you agree that you are not Frontline Foam and/or related to Frontline Foam or Derrikk Sun.