Logitech (Logi) C270 webcam tripod mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tripod mount that replaces the clip this webcam comes with.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
A simple and clean looking tripod mount for the C270. This uses the hardware (plastic pin and tiny screw) the original clip is mounted with, so you can revert to the original whenever needed.
It's sized to match the plate of the Manfrotto Pixi, but it's a universal mount that should work with any standard ¼ threaded tripod bolt - these come on most smaller tripods, selfie sticks, etc.
The lens and mount axes are more or less aligned (as they should be). I did not tweak this to perfection - the test print came out perfectly adequate for my needs - so if you need better accuracy, feel free to tweak the model!
The threads are a bit loose, so you don't strip them on insertion. Don't overtighten, be gentle.
NOTE: FreeCAD 1.1 (dev) was used for creating the model.
Assembly
I recommend having a pick or needle for disassembly, and a 2-3mm diameter rod for pushing the pin out (it's a tight fit on the original).
Make sure you don't lose the tiny rubber plugs that cover this pin and screw on the original!