Mud guard for MTB bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had an old 3d printed mud guard that got damaged when I switched out my fork. I did not find the STL again so I…
- Ocena
- 5 / 5
- Polubienia
- 340
- Pobrania
- 944
- Wydruki
- 8
- Wyświetlenia
- 4382
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had an old 3d printed mud guard that got damaged when I switched out my fork. I did not find the STL again so I designed my own quickly. This one is super sturdy compared to the other flat printing models and can be easily printed with PLA and 0.3mm resolution for a quick print.
If you want to make sure you get no warping and have no housing better print it with a small brim.
Pictured is a 29" RockShox CID fork, but you can scale it easily in the slicer before printing.
Category: Sport & Outdoors