Xenomorph Orbiter Eddy Duo Back Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly modified back cover to account for the switch on the Eddy Duo
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The current Eddy back cover is for the non Duo version. The Duo version has a switch to go in between modes. I just opened the hole up a bit to account for the switch, and the smaller chip that is also further down the board.
I have not tried it, but it should also work if you would like to put a heatsink there. The chip is smaller on the Duo, but it should still work.
I printed this in PPS-CF because I'm experimenting with different filaments at the moment, but the usual ABS/ASA would work just fine. Printed on a Bambu X1E, but building a highly modified Sovol SV-08 that this will go in.
Made in TinkerCAD.
Cheers and happy printing!