Xenomorph Orbiter Eddy Duo Back Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slightly modified back cover to account for the switch on the Eddy Duo
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 38
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The current Eddy back cover is for the non Duo version. The Duo version has a switch to go in between modes. I just opened the hole up a bit to account for the switch, and the smaller chip that is also further down the board.
I have not tried it, but it should also work if you would like to put a heatsink there. The chip is smaller on the Duo, but it should still work.
I printed this in PPS-CF because I'm experimenting with different filaments at the moment, but the usual ABS/ASA would work just fine. Printed on a Bambu X1E, but building a highly modified Sovol SV-08 that this will go in.
Made in TinkerCAD.
Cheers and happy printing!