1 / 2
NFT Pixelart - Cryptopunk#7523
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You have to print every pixel in the "desired" color. For easier printing they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.
E.g.: “Light grey x4_38”
This transfers to:
- Color: Light grey
- Type: 4x connections
- Number: Print 38 pieces of this connector in the color light grey.
There's a PDF you can print out so you have a reference for assembly. It took me around 1,5h to assemble and over 100 hours to print all pixels.
I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)
I also made one which you can see here:
Have fun!