NFT Pixelart - Cryptopunk#7523
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I transfered the Cryptopunk NFT to 3D printable pixels.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 1
- Views
- 715
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You have to print every pixel in the "desired" color. For easier printing they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.
E.g.: “Light grey x4_38”
This transfers to:
- Color: Light grey
- Type: 4x connections
- Number: Print 38 pieces of this connector in the color light grey.
There's a PDF you can print out so you have a reference for assembly. It took me around 1,5h to assemble and over 100 hours to print all pixels.
I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)
I also made one which you can see here:
Have fun!