Another doorstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One more doorstop. After trying out a few stoppers, I finally designed my own. It works for my doors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v3.0
One doorstop more
There are nearly infinite different models of doorstops to find. Anyway, after I tried some designs unsuccesful I ended with designing my own. Works great for my doors.
Sizes
2 different sizes published, one for doors with at least 3 mm gap, the other one for 8 mm.
Take the next bigger size when the door is at the radius (see pic with the black doorstop).
Printing
PETG (~ 15 g) recommended (PLA will do it too), Nozzle 0,4 mm or 0.6 mm (2 wall loops), no Brim, no Support.
Usage
No joke ;-D
Place the door stopper on the floor, close the door until the door stopper is a few mm in the gap. Then fix the door stopper with your foot and push the door further onto the stopper with a little force. This raises the door slightly in the door hinges and the resulting pressure and friction force holds the door securely.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work