Another doorstop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One more doorstop. After trying out a few stoppers, I finally designed my own. It works for my doors.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
One doorstop more
There are nearly infinite different models of doorstops to find. Anyway, after I tried some designs unsuccesful I ended with designing my own. Works great for my doors.
Sizes
2 different sizes published, one for doors with at least 3 mm gap, the other one for 8 mm.
Take the next bigger size when the door is at the radius (see pic with the black doorstop).
Printing
PETG (~ 15 g) recommended (PLA will do it too), Nozzle 0,4 mm or 0.6 mm (2 wall loops), no Brim, no Support.
Usage
No joke ;-D
Place the door stopper on the floor, close the door until the door stopper is a few mm in the gap. Then fix the door stopper with your foot and push the door further onto the stopper with a little force. This raises the door slightly in the door hinges and the resulting pressure and friction force holds the door securely.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work