ArcDroid Monitor Arm Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple back plate that attaches to the back of the ArcDroid controller and adapts it to a Vesa mount.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this compact adapter to solve the shortcomings of existing ArcDroid controller mounts. Rather than relying on proprietary brackets or bulky fixtures, this part screws directly to the back of your controller using its original mounting holes, then converts those attachment points to a standard 100 × 100 mm VESA pattern.
Plug-and-play: Uses the stock mounting locations on your ArcDroid controller—no modifications required.
VESA compatibility: Converts your controller’s screw holes to a 100 × 100 mm VESA pattern for attachment to most monitor arms, wall mounts, and brackets.
Low profile: Keeps your controller close to the wall or arm, minimizing protrusion and snag hazards.
Universal material: Print in PLA, PETG, ABS, Nylon—anything strong enough to support ~2–3 lb.
Hardware Required
| Quantity | Hardware | Notes |
|---|---|---|
| 4× | M3 × 8 mm screws | To attach adapter to controller; use your ARC-stock screws |
| 4× | M4 × heatable brass inserts (PEM-style) | For a rock-solid mounting interface to the VESA plate |
Tip: Heat-set brass inserts in PLA or PETG at ~220 °C, or in ABS at ~260 °C
Print Settings & Recommendations
Layer height: 0.2 mm
Infill: 30 % – 50 % (depending on material strength)
Wall shells: ≥ 3 perimeters
Orientation: Print flat on the “ArcDroid face”.
Supports: None
Installation
Remove the four existing screws from the back of the ArcDroid. Align the four M3 screw holes, then fasten with the 8 mm screws.
Insert brass inserts: Heat-set the four M4 inserts into the adapter’s matching holes.
VESA mounting: Secure the adapter to your VESA plate or arm using M4 screws.