1 / 1
ArcDroid Monitor Arm Mount — image 1

ArcDroid Monitor Arm Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple back plate that attaches to the back of the ArcDroid controller and adapts it to a Vesa mount.

Rating
0 / 5
Likes
2
Downloads
52
Makes
0
Views
337
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

I designed this compact adapter to solve the shortcomings of existing ArcDroid controller mounts. Rather than relying on proprietary brackets or bulky fixtures, this part screws directly to the back of your controller using its original mounting holes, then converts those attachment points to a standard 100 × 100 mm VESA pattern.

Plug-and-play: Uses the stock mounting locations on your ArcDroid controller—no modifications required.

VESA compatibility: Converts your controller’s screw holes to a 100 × 100 mm VESA pattern for attachment to most monitor arms, wall mounts, and brackets.

Low profile: Keeps your controller close to the wall or arm, minimizing protrusion and snag hazards.

Universal material: Print in PLA, PETG, ABS, Nylon—anything strong enough to support ~2–3 lb.

Hardware Required

QuantityHardwareNotes
4×M3 × 8 mm screwsTo attach adapter to controller; use your ARC-stock screws
4×M4 × heatable brass inserts (PEM-style)For a rock-solid mounting interface to the VESA plate

 

Tip: Heat-set brass inserts in PLA or PETG at ~220 °C, or in ABS at ~260 °C

Print Settings & Recommendations

Layer height: 0.2 mm 

Infill: 30 % – 50 % (depending on material strength)

Wall shells: ≥ 3 perimeters

Orientation: Print flat on the “ArcDroid face”.

Supports: None

Installation

Remove the four existing screws from the back of the ArcDroid. Align the four M3 screw holes, then fasten with the 8 mm screws.

Insert brass inserts: Heat-set the four M4 inserts into the adapter’s matching holes.

VESA mounting: Secure the adapter to your VESA plate or arm using M4 screws.

Tags