Forked version of Bracket to ventilator 16mm curved 15 angle for Universal car phone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Forked version of Bracket to ventilator 16mm curved 15 angle for Universal car phone holder.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 1915
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I found the Universal Phone Holder by Lokva to work pretty well, but it didn't want to stay clipped to my honda fit's vents well enough long-term, so I designed a “Bracket to ventilator 16mm curved 15 angle”
remix with slightly longer clips/shovels, so the flat space in the clips was actually 16mm, and added an additional clip/shovel to make it more rigid and have a much better hold onto my vents.
As pictured, printed with 0.15mm layer height with PETG, with supports. I recommend PETG because PLA will warp/deform when it gets warm from the sun coming through the windshield on a hot day.