Yamaha Tenere 700 Speedo Mounting - For Handlebars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount design to relocate the OEM LCD speedo of a Yamaha Tenere 700 to the handlebars.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is heavily based off The SB Moto's design - http://thesbmoto.com/uncategorized/upper-speedo-plate/
I had trouble meshing the model after converting it from an .X_F so there are some slight differences.
It is worth noting that the design is for the middle centre of the handlebars, but the lower bar mount runs all the way under the bar, preventing this from mounting there without risers or modifications. My solution was to mount it to the side, screw the one fitting mount in and feed a zip-tie between the handlebar and mount to secure that side.
I modified the mount to extend the sides beyond the handlebar clamp (v2), this allows for the dash to be fitted in the centre of the bars, with the mount fixings extending beyond the handlebar clamps.
Please note that both mounts will require the lower mounts too to be securely fastened to the handlebars. Printing 2 off will allow both sides to be secured, I only uploaded one lower mounts model as it will be the same part on both sides.