Liczymy pasujące modele…
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
Replacement gear for BMW R1150GS speedometer drive - BMW RealOEM number 62122306287. There is probably no official replacement part of the plastic drive, so I took the original one and re-modeled it. Please note that dimensions of the…
This is a speedometer for your bicycle - powered by an Arduino Nano. It uses a linear Hall effect sensor mounted on the front shock absorber and a magnet mounted on the front wheel in order to count the revolutions of the wheels. Using…
Speedometer Clock Inspired by analog dials of a retro motorcycle. It shows time in hours and minutes in a pair dials which resembles a tachometer and speedometer. The time is fetched from the Time Server and constantly updates it. The…
Introduction I liked the idea and the look of Oogway´s Speedometer Clock but i don´t liked the printed watch face, because i don´t get it printed nicely. So i decided to make a remix for a plotted watch face. The idea was to create a…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
Sigma ROX4 Speedometer Holder for fix with cabel ties
This dashboard cover is designed for the KTM 790 Duke . It protects the speedometer display against scratches, dust, and direct sunlight, while providing a clean look that integrates perfectly with the bike. ✅ Compatible with KTM 790 Duke…
I admit that its assembly is quite complicated, but once installed it will close the hole perfectly, given that it incorporates the gasket very well. I recommend printing it with 100% infill and using support material and brim. PLA should…
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
Tachogehäuse für Simsonmopeds mit 60mm Durchmesser Tacho Speedometer housing for Simson with 60mm diameter
Dashboard with speedometer and tachometer for SCARBO SVF1 Race Car Model
Replacement gears for PAL speedometer/odometer often found on old SKODA cars and JAWA and CZ motorcycles. Print in ABS. <0.4mm nozzle recommended Enjoy! Category: Replacement Parts
If this looks way too small in your slicer, please scale to from 100% to 2540%. [Updated] Went back and made a sleeker version. I've not gotten a chance to print and use it but there should not be any changed that affect functionality.…
Bike speedometer helical gear fitted in Suzuki TS50/X/W (SA1A). the helical gear is 23R@45 and module of 0.8mm.
This lid was printed with PLA, however, i recommend using PETg or ABS cause its going to bend up when sunlight hits on it. My friend wanted it to look exactly as the original part was so he sanded it up and then did it a paint job.…
This design is heavily based off The SB Moto's design - http://thesbmoto.com/uncategorized/upper-speedo-plate/ I had trouble meshing the model after converting it from an .X_F so there are some slight differences. It is worth noting that…
As requested by a Reddit user. Work in progress!
Cut the existing needle off of the black round piece and glue this on. The original needle is made from a different plastic so they should separate easily with an exacto knife. I would only suggest "VW_Bus_Speedo_needle" for abs or…
Speedometer cable holder for YAMAHA XT 600 Designed for most YAMAHA XT DT motorcycles
A gasket for a CT90 with the D-shaped speedometer. I used TPU to print it. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Matter Hacker TPU Black Category: Automotive
This is a replacement speedometer screw i made for my dad. The scew is available with 7 and 8 threads. In addition I added a version with a smaler bridge and a slightly elevated bridge, whitch fits into the opposite sides hole (at least…
45mm x 5.4mm nose bridge designed based on Speedo Swimming Goggles. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE and definitely go check my Etsy…
VW LT Speedometer pinion 281957821G (Z=18) Designed but never used! Print and use in car on your own risk! Also if you scale up it looks good as an ornament on a desk.
These toy gauge dials are my own design, however, the overall gift idea is not original to me. Check out this video for a quick understanding of their intended use. SHOPPING LINKS FOR MATERIALS: Steering Wheel set of 4 —…
The problem The magnet of the electric bike of my father-in-law used to rotate on the spoke it was attached to by the default single-screw mechanism (see picture below) causing the speed controler of the motor to malfunction (for anyone…
Replica of speedometer for Jawa 250 and 350 motorcycles. 120kmh and 140kmh variant.
I purchased this speedometer from Aliexpress, though I could see that the mounting points were the same for a dozen generic models of motorcycle speedometers. The bracket it came with wouldn't work in the spot I wanted to mount it, needed…
Printed in PETG with 0.2 mm nozzle. Tested for ca 1500 km with no problems. The fit might be a bit tight and require some sanding on the axle, depending on the printer.
Smart Fortwo Speedometer - Clock Category: Automotive
This is a used speedometer cover designed for a forty-year-old Simson motorcycle. It provides protection and housing for the speedometer, ensuring its durability and functionality while adding a vintage touch to your bike.
I needed this adapter because I replaced the original Orbea frontlight with integrated Garmin mount. This adapter attaches where the original frontlight is normally attached. You can use the original screws.
This is a variable speed centrifuge with speed control and readout. No programming or soldering required. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…
It's a Lego speedor top (Lego Chima) for the older version of speedorz, all you need yo do is connect it to the bottom part, and have a ripcord if you want it to move on its own.
I made a groove for putting in a o-ring under the glass. And the top-lid is pressed on and is putting pressure on the glass and oring. There is also a groove underneath the body, and the plan was to print a gasket in TPU, but the TPU a…
ESP32 (Arduino) Based Bicycle Computer with GPS and SD logging This is still work in progress but mostly functional this far. The code and mechanical aspects of the project definitely work well enough for a daily usage scenario.…
This replaces the foam gasket thing that goes between your plastic speedometer and the part of the handlebar clamp that it sits in. Since it's been ~40 years and actual Honda part has been out of production for a while now, but to be…
Initial Try, no long term proof jet Dimension: Gear - see picture. Outer Dimensions reduced by 0.2mm Fin - outer length 15mm, height 6mm Zylinder (without gear and fin) - inner diameter 25.1mm , outer 29.6mm, 8.3mm I printed it with PLA…
A mostly printed centrifuge with variable speed control, speed readout, safety features, and improved rigidity. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…
speedo gear for 1980s turbo dodge cars
Small cover to diffuse light from the bulbs. The originals were melted. I've included the Fusion 360 file in case you want to modify it. See the video below for more info.
The stock dampers on the speedometer of my DR650 had started to flatten out, causing excessive movement of the speedometer housing. I had some TPU 95A filament, so I modeled up Version 1. Upon installing, I discovered that the 95A…
You will need to glue it or use double sided tape
This is a speedo holder for a Koso DB01RN for Husaberg 70° models with all wiring instructions. I made a 0° and 10° holder. You need to check which angle is better for you (because of reflection and the “bad” viewing angle of the display…
Should be printed with PC and 0.25 nozzle, i used 5 perimeter and gyroid infill. The module for the gear is 0.8 and it has 21 teeth.
Bracket I made in Blender because my speedometer didn't come with one. Test print with SUNLU PLA meta. Creality Ender 3 v3 SE. 0.16mm layer height. 0.4mm nozzle. Bed temp set at 65 and nozzle at 190, 80% print speed. 2x skirt loops and…
I neede some simple and decent looking cover to provide shade for speedometer on my Honda CL500, so I made this. It can be tightented by self tapping screw, but I tested it without it and it holds firmly even in higher speeds. Printet…
Print at 100% infill. May need supports.
Is your speedometer hunting up and down a bit or being inaccurate? Or maybe it's completely bonkers. This little piece semi regularly wears out and needs replacing to maintain a snug fit without too much play. Once it's loose your…
Clips onto the bottom lip of the speedometer on an R56 mini. Phone charger can be stuck to it. Made for car with satnav, may work without.
I modeled the buckle exactly like the original 1:1, in case the original buckle breaks. Works with NABAIJI swimming goggles from DECATHLON
Speedor Cover for the bear tribe, all you need is a lego flywheel, and the connection pieces.
Replacement retaining straps for Speedo swimming paddles. The original rubber ones rotted and broke. The print is just printable on a 256x256mm build plate, rotated to the diagonal. The model fits the XL size. Printed with TPU95A…
My original clips disappeared so long ago that I don't even remember what they look like. This clip was modeled to look somewhat similar to other clips on the bike. Only tested on my 2009 Triumph America, but likely works on other…
After swimming in the ocean for last couple of months and meeting different underwater creatures without pictures or videos to show my wife and kids I decided that I needed to find a way to mount my Hero4 GoPro camera. Since I've been…
Speedo/Tach mount modeled for 2004-06 Yamaha FZ6, Model requires 4x 1/4-20x2" (short riser) or 1/4-20x2.5" (tall riser) bolts, 4x 1/4-20 nuts, and factory hardware to mount speedo/tach into the mount. Includes 2 sizes of risers and is…
This is the case for an Arduino speedometer I made with random stuff I had laying around during quarantine last year. It assumes the tire size is a standard road bike tire on a standard road bike wheel. The code can be edited to specify a…
this can hold a veypor and two toggle switches. good for heated grips and heated seat switches you need some m6 nylock nuts and some m6 bolts, cant remember the size this fits right between the handle bar clamps on my drz400E. Category:…
This mount was specifically designed for a Koso EX-02 universal speedometer to fit onto a Yamaha TW200 Trailway. The challenge was getting the shape of the Koso speedometer to fit into the opening. It took a number of iterations but this…
The speedometer on my bike wasn't working so I ordered a GPS speedometer from Amazon . The GPS speedometer requires a 52mm circular opening, so I designed this bracket to attach to the top of my handlebars. I discovered the display isn't…
MZ Dashboard Lite is a free DIY Sim Racing dashboard featuring a real moving speedometer, fuel warning indicator, and shift light support. Designed for SimHub and Arduino Nano, this compact dashboard is easy to build, inexpensive, and…
Yamaha Jog SA-12 Speedometer Gear (16T) Replacement speedometer helical gear for Yamaha Jog SA-12. Designed for high durability and a precise fit. Successfully tested in real-world conditions after being printed with Nylon. Technical…
The original mount for the speed sensor of my Sigma BC 14.16 STS CAD speedometer has a very small joint. While being mounted on the front suspension strut of my velomobile, it broke… The replacement sensor is now glued onto my new holder.…
These are protective bulb covers for Speedotron black line heads, specifically the older 10x models (102, 105, 106, etc.). The design is a little bit messy as I reverse engineered the mounting plate from a scan of a speedotron reflector,…
Created a mount for the Timewise 825 speedometer. Print solid in high temp plastic like ABS since it may be in the sunlight. Top pivots on a 1/8 inch shaft. The knob rotates on a 1/4 inch shaft that is tapped almost all the way through…
Phone Holder for MiniCooper F55. Found in the Thingiverse, but now is no longer available. Useful to recicle old magnetic phone holders. Two pieces that bolted to the speedo meter, let the phone in a comfortable place to use navigation…
Husqvarna 401/701 Speedometer Backcover
This is a cap for Honda CBR speedometer gear. Designed for CBR600F2, but i think that same gear is used on other Hondas too. This may come handy when using an aftermarket speedometer and speedometer cable is removed. Print Settings…
This a speedo mount to fit on a an R6 Forks. I believe this would fit on a R1 and similar years too. The boss for the ignition key has been cut off to fit this. This fits a 85mm or 3 3/8" Gauge, the one I specifically have is a “Motor…
Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.
I installed HDB handguards on my 2019 690, and it caused interference between the front brake lines and where my speedo was mounted on the Lynx fairing dash. The first part is a bracket (print x2) that bolts onto the HDB handguard bar…
tomos BT digital speedometer
Nozzle - 205C° Bed - 50C° Infill 25%
Колпачок для спидометра ГАЗ, Cap for GAZ speedometer
console for the mount of a Sigma BC 14.0 speedometer you may change the angle within Sketch001
Works great for a tight fit. Category: Sport & Outdoors
Victory Vegas Speedo Overlay - KMs Designed for my MPH Bike to read KMs. This sits on top of your speedo and overlaps with common speeds.
Sigma speedo .16 family fork mount Intro I looked for a small speedo with fork mount, like the Sachs Huret Multitronic from the 90ties for my next bike. I need only the total km, optional the speed, but no fancy stuff. One of the…
About See what it looks like here: https://www.youtube.com/shorts/_z8Omeqew1A NOTE: YOU NEED TO BE COMFORTABLE WITH WIRING AND MODIFYING YOUR ELECTRICAL SYSTEM FOR THIS MOD. I AM NOT RESPONSIBLE IF IT GOES WRONG FOR YOU OR YOU RUIN YOUR…
My Kymco's speedometer stopped working - it was caused by worn gear, originally made from Nylon or some other plastic. I tried to re-model it and print it with PETG - It works for more than 3 years without any failure! Although its made…
The speedometer I bought had a too big distance to the magnet and therefore didn't work sometimes. I designed a tool to fix that problem. If your bicycle has slightly other dimensions, adapt it in the first sketch of the f3d - file. I…
part for speedometer repair on Honda NSR 125r
In case you break it- I created a mount for attaching a speedometer/throttle to an electric scooter Ruima/Speedway 4 Mini Pro. I hope you find it useful.
Gorgeous Cafe Racer Modified Dashboard, outer case,
My adapter for speedo was worn out so made a simple 3d model to replace it. Now driven 2000km on it and seem to hold up good in PETG.
This is a case for the Sonoff Basic Wifi switch designed to fit tightly enough (like a Speedo) to allow in-wall light switch installation. I do not know if this is safe or legal, so do it at your own risk! It is definitely safer than just…
With Windsurfing records now exceeding 100Km/hr there is a real need for an accurate feedback for sailors. All previous systems have relied on a watch screen (impossible too see at high speed) or some sort of audible feedback. Most are…
Speedometer cap replacement for Polaris (sportsmann 2006). The speedos on these are known to fail so instead of buying a new speedo you can just print a cap to keep water out. Made it possible to zip-tie loose cables to the backside of…
I engine-swapped my KZ200 and the new engine doesn't have a cable tach output, so I pulled the tach apart to make a clock. A lot of 70s and 80s Japanese motorcycles use Nippon Seiki instruments, and of those a lot are the same size. If…
This is the enclosure for an open source speedometer for motorcycles that I am working on. The speedometer uses a 20x4 hd44780 character LCD for a display, and is powered by an Arduino nano. Various other small breakout boards make up the…
Printed in ASA. This will clip to the oem speedo by sliding.
Quick adapter to use a new Huret cable with the original speedometer. Category: Automotive
Outer diameter 77mm printed with transparent filament
Speedometer for pedal car or another toy. Designed to fasten to car with a zip tie.
