Koso DB01RN speedo holder Husaberg 70° with wiring instructions 390 450 570
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a speedo holder for a Koso DB01RN for Husaberg 70° models with all wiring instructions.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a speedo holder for a Koso DB01RN for Husaberg 70° models with all wiring instructions.
I made a 0° and 10° holder. You need to check which angle is better for you (because of reflection and the “bad” viewing angle of the display of the Koso speedo that you can read best from an angle instead of straight on)
The original low fuel indicator is used as the speedo can't read a ntc tank sensor.
I used thin TESA fabric tape as padding on the two blocks of the print that are under the speedo (its the tape that is used on cars to insulate wiring looms).
And I used the original rubber and metal spacers to mount it on the original spot of the bike.
Also I used the included rubber rings from the Koso speedo holder to put them in the holes where the speedo mounts on the print.
(I have a KTM mask and I didn't try the original, but everything should fit as well)
I created parts of this model in the slicer so I can only guarantee that the model works in the Bambu or Orca slicer.
I recommend using ASA CF (or ASA).
There is also a picture with the recommended printing position.
The complete wiring can be easily and clearly seen in the pictures. (Look in the files section under “Other files”)
(You may need some blocking diodes for the turn signal lights. I don't know for shure because I had them in from before putting in the Koso speedo and i didn't put them out)
You need to use the slow setting for the RPM signal. for the rest of the settings you should be able to figure out by yourself.