Liczymy pasujące modele…
Foldable Sunshade for Humminbird 570 Can be folded and unfolded repeatedly for better storage. Print: Perimeter 2 Filled with 15% Gyroid No supports required Material used PET-G
Wydruk około 10,01 €–12,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is compatible with the lego system.
This is the second rendition of my first case ( here ). The case got an entire overhaul while mantaining the low profile gpu sandwich design. It consists of 10 pieces, it can be printed with a small printer and does not use threaded…
Wiki Link: https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS) Add a filament change about there for the 2-color look.
This model is compatible with the lego system.
Gwr 57xx 5700 class model rail model train british rail steam locomotive tank engine
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
Blank cover for the VW Polo 6N1 or SEAT IBIZA, INCA, CORDOBA
A 45° wedge stand to hold the Logitech M570 trackball mouse. Held in place via ball and battery holes. Place to store battery cover. Find ergonomics better than flat and takes up less space. Print instructions Wedge print is hard plastic.…
Turn your dewalt 20v saw into a track saw with this sled. Works with tracks compatible with makita track saw. I use mine with a powertec 71387 track. Glides nicely. Printed in PETG. Screw 2 M6x35 screws in from the bottom of the track.…
The Power Button of my wife's Lenovo Thinkpad T570 was broken and get's stuck in the case. So i decided to make a replacement. I printed the button from Nylon. To Repair the Button you have to do following steps. Remove the battery…
Volkswagen Polo 6N1 central console USB charger Insert · Background: I've recently installed a dashcam in my VW Polo, before this I had only the phone holder and I used a cable to charge my phone from one of these car cigarette lighter…
This model is compatible with the lego system.
This model is compatible with the lego system.
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
20 deg stand for a M70 Logitech trackball
This model is compatible with the lego system.
I have released a V2 here ! Improved design and print-friendlier. This is my first 3d printed case design, the Epsilon 570! It consists of a frame, two sidepanels and a set of feet for a total of 5 pieces. It can be printed with a small…
A small item to keep the guard of your circular saw open without having to modify it.
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
I lost the battery cover to my mouse and the battery tends to fall out without the cover in place. I found a printable replacement cover but it didn't quite sit flush with the mouse and so I created a remix in FreeCAD. I also created a…
Dell Latitude E5570 SSD M.2 adapter
A gridfinity tray for the Wurth AS 4 electric screwdriver 5701300024 Should also fit the bosch go screwdriver!
This is a simple Weathervane for Kestrel 5700 Fully inspired by https://www.thingiverse.com/thing:2444368 changed to use cheaper and highly available materials. Changes: Hole is designer for 6mm x 6mm stick (highly available in my area)…
The same as Ebachalo's but as one piece vs two. Original: https://www.printables.com/model/52753-logitech-m570-trackball-wedge-stand-45deg Print settings: Prusa Slicer, Supports: auto gen supports, overhang 45, style organic, top contact…
This model is compatible with the lego system.
Cupholder for a friend Print instructions Print in PETG or else it will become all melty in your hot car
This is the third hand mixer that breaks the same way. We decided to repair, but did not find any replacement part. Only in an Asian store for a well known German brand, so we decided to clone it, although some parts were fused.…
This model is compatible with the lego system.
This model is compatible with the lego system.
Back-plate for a 2007 Ibanez RG1570 Prestige. Might work on other RGs and/or other years. Not sure. Designed at 138.85mm x 85.7mm dimensions. My original back-plate has been falling apart over the years, mostly breaking around the screw…
A bracket to mount your Kensington SD5700T dock under your desk.
Kestrel 5700 Weather Meter Scan
This model is compatible with the lego system.
This is a belt pouch for the Kestrel 5700 ballistic calculator. Only for print in TPU as it is designed to have a slight drag. Kestrel is to be inserted head down as shown in pics. I added a bit of the loop part of Velcro on the sides of…
Before you print This is a WIP project (work in project), almost done in fact, the photos you will see its from all the prototypes I made, some of the problems I found in the assembly are corrected. This project it's compatible with…
There are two models of mouse holder. Holder - This fits the mouse only. Holder with Pusher Hole - this fits the mouse as well as a trackball pusher. The other file is the trackball pusher, used to easily remove the trackball to clean the…
After printing Kensington SD5700T Under Desk Mount , the power supply was left unmounted and I was unable to find a mount. I found a universal under desk mount and customized it to fit this power supply.
These are replacement standoffs for the 570x case. The short ones are used for inside of filters or the top front plastic. The long ones are used if you want to remove the filter and still use the glass. These use the original thumb…
This model is compatible with the lego system.
Like my similar design for Polaris , this is a wrench used to remove and re-tighten the fuel ump retaining ring on an ATV. In this case, the wrench is designed specifically for a Can-Am Outlander 570 EFI, but as before, I am sure there…
I have a 2006 Fleetwood Pace Arrow Class A RV that has this Denso brand dash climate control unit. The temp change is accomplished by a dial which then moves a cable to open and close a vent to the heat source. The clip that used to…
Changelog: 2026-06-08 updated to v0.2. adjusted depression for battery door. Accidentally had m6x16 in BOM which should be m6x20mm. I added a m6x16 version for m575. 2026-06-08 added beta logitech m575 mount based on…
This model is compatible with the lego system.
Introducing the ultimate companion for your vintage DYMO 1570 label maker - a sleek, 3D printable wall mount! Designed to keep your trusty tapewriter within arm's reach, this model marries convenience with a touch of nostalgia. Crafted…
I was dissatisfied with the noise my PowerColor Red Dragon Radeon RX 5700 XT made when playing demanding games. To get it to be quieter/cooler, I created a custom fan shroud, that will fit two Noctua NF-P14 fans. It will most likely also…
Here you can get a holder for the Logitech M570 Trackball mouse. See the drawing for dimensions.
Der Drehknopf für Gasgrill Outdoorchef (Montreux 570) kann auch für andere Modelle verwendet werden. Das Loch im Knopf ist sehr passgenau ausgemessen und kann ohne Kleber montiert werden. Für das Drucken benötigt man keine…
I was missing one of these blanks on my 1996 T4 looking at the prices of used blanks online I figured I could get quite close designing an stl instead, I printed this at .2mm in ABS I didn't clean the bed prior to printing, the original…
A 3D printable I/O shield for the ASUS TUF X570 PRO WIFI motherboard.
I printed it in TPU so it would be more resistant to rattling and impacts. Print it in upright position to avoid any supports. It can be mounted either screwing it to a bottle mount with some shallow bolts or using zip ties.
A remixed IO Shield of Petr Sedlář's A2SDi for SC505 Chassis IO Shield , but instead made to be compatible with the AsRock Rack X570D4I-2T motherboard. The STL is extremely dirty, but I'll clean it up once I have the time for that. Bambu…
These are ducts I've designed for both Noctua NF-12 and Arctic P12 fans when deshrouding the PowerColor Red Dragon AMD Radeon 5700 XT in the NCASE M1 chassis to maximize fan-to-heatsink airflow and utilize 120mm fans to increase cooling…
A PSU end cover for the Corsair 570x Crystal Series case. Hide those power cables! Print Settings Printer Brand: Zortrax Printer: Zortrax M200 Rafts: Doesn't Matter Supports: No Resolution: 0.09mm Infill: 100% (Can be 20, I just wanted a…
My XFX AMD Radeon RX 5700 XT was reaching high temperatures while making a lot of noise. To improve both, I designed this fan mounting bracket and because overkill is highly underrated (and I had the Noctua fan lying around) I tried to…
Created a tank key for IDO Seven D toilets. Fits to the toilet's two sided flush button and opens the rod that needs to be remove before opening the tank. Has a 15mm hex, with a bit holder at the bottom. IDO Z6205700001 IDO 5731280 WC…
This is a simple wall mount for the Netgear Nighthawk Tri-Band 6E Mesh router and satellites (same size). You'll recognize it by it's square shape. This simply allows you to mount the router. Prints bottom-side down. No supports needed.
This model will only work for this exact combination of case, cooler and motherboard! Any other combination will most likely change the position of the cooler in the case. Feel free to remix.
I printed my first parts in PETG, but when I used them, once I pulled them out of the dishwasher, they were deformed. They couldn’t handle the heat inside the dishwasher. That’s why I printed them in PCCF "Prusament PC Blend Carbon Fiber…
A simple headphones stand-holder for the Corsair 570X case. Unscrew the 2 thumbscrews holding the top glass, place the holder and then screw them again. Minimal support needed under the arc.
These are press-fit replacements for the clear plastic pieces that fit into the aluminum extrusions at the back of some Fisher & Paykel manufactured (including DCS branded) fridges' shelves. They are equivalents to Fisher & Paykel part…
EN: Version 3 of a model. Created in Solidworks. Original file included (for further modifications, if u need). No glue needed. Tempered glass case sides (panels) sits on this pins/studs/pintles/standoff call as you want. Inserted into…
This is a speedo holder for a Koso DB01RN for Husaberg 70° models with all wiring instructions. I made a 0° and 10° holder. You need to check which angle is better for you (because of reflection and the “bad” viewing angle of the display…
ORGANIZZATORE GT570 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
lego 36840 36841 99781 99780 2436 99206 87609 64570
This mount holds an ABUS Bord uGrip 5700 folding lock on the top of a Thule pack 'n pedal rack. Print instructions Category: Sport & Outdoors Summary This mount holds an ABUS Bord uGrip 5700 folding lock on the top of a Thule pack 'n…
I've inserted magnets in the bracket to snap it to the case, but I've included a solid version to tape down or add your own holes for magnets.
These are feet I designed for my Sliger SM570 which allows me to use 120mmx25mm case fans under the case. They allow the use of the stock hardware; stock lock ring nut can be removed from rubber feet easily. You can see from the photos…
Quickly designed a diffuser for the LEDs on the X570 TUF wifi motherboard as they'd shoot straight out of the glass front panel, something I didn't care for. Was happy with how it came out, so I decided to make three different versions…
New gearbox for kids car, allows you to upgrade current motor to 12v RS570 3000kv motor, for much higher speed. One file is a dummy file, which allows you to make very fast print only for the motor and the first sprocket wheel, I made…
a headphone stand that hooks onto the glass of a corsair x570 pc case
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
This is a stand for the sony icd-ux570 voice recorder. It's setup to point downwards towards a laptop while keeping it off of the desk The pins that hold the top and bottom together are designed to go through a 2.5mm hole (the pin holes…
A tool to open the fork of your kawasaki kx 250 2018
This laptop came with no HDD and no caddy so had to make one. It fits perfectly and even lines up with one of the bottom panel screws for extra security. I based my design on Taco_man's e5510 caddy so have copied the license he used, I…
I printed my first parts in PETG, but when I used them, once I pulled them out of the dishwasher, they were deformed. They couldn’t handle the heat inside the dishwasher. That’s why I printed them in PCCF "Prusament PC Blend Carbon Fiber…
My kids lost the nozzle to our Honeywell humidifier HUL570BC (an ultrasonic one, but pretty large) They were quite overjoyed when I came up with this. Pikachu saves the day. Probably better and more appropriate would have been koffing,…
My design is based off https://www.printables.com/model/717426-dewalt-saw-sled-track-saw-dcs570b/remixes Infill - 20% 3 walls Support needed for overhang. Print saw locator lugs up and track guide down.
MoleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
I've made this to improve saw dust collection from my Rebir IE-5708M planer as the original one is too small and causes constant jams.
DCE570B typically takes 29oz tubes this adapter allows for standard home caulk tubes to be used. The front and rear shim “may” be unnecessary however they help with racking when the tube is under pressure
This is a container to hold this voice recorder on the HSW Slice it and print it upright; needs supports to print the 13mm hex peg on the back Attach to insert_empty.stl (from here:…
This moves the glass 4mm away from the case body allowing for better airflow. In my case I had a significant drop in temperature with the side panels removed so this helps a bit. The rings go around the pegs on the case to push the glass…
The Russell Hobbs sandwich maker factory arm broken. This is a replacement. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Gembird PLA White Notes: No support need…
This is the standard model for testing the ASTM D570. Used for testing the Water Absorption of Plastics. its dimensions are: 3.2 mm Thickness 50.8 mm Diameter https://store.astm.org/d0570-22.html
Lego compatible TECHNIC 6M HALF BEAM (28570)
Simple icd-ux570 stand. 0.4mm nozzle 0.2mm high 3 Walls 30% infill Stand in picture printed in PETG
Resized the rear hook space to fit it on my Dell Latitude E5570. The distance is 24 mm. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Any PLA Any Category: Office
Print with TPU and use double sided adhesive tape to mount the feet.
A fan bracket for a small fan to cool the X570DU chipset
Stray light deflector for the BenQ W5700 rojector
Powercolor RX570 bracket baffle I/O shield.
I needed to free up some space on my desk at home to work more comfortably in smart working, so, since I have a monitor and a keyboard, I decided to put the PC vertically. It is definitely inconvenient to turn on the pc but I never turn…
Customized version of https://www.thingiverse.com/thing:537516 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=537516 Instructions Using the following options: holder_x_size = 80 holder_y_size = 15…
Installing instructions https://fixolab.dev/en/blog/overkill Model available at Maker World https://makerworld.com/en/models/574732 Models https://makerworld.com/@fixolab
Logitech M570 trackball replacement rubber feet. I'm loosing these sometimes. Printed from Fiberflex 30D, 0.15 mm layer height. Installed using thin double sided tape.
Remix of the original design by Corey Ward. Added Skadis L's to the back, removed the screwholes, and added two notches to give it much better retention. I'd hate for your lovely vintage label maker to fall on the floor and break.
Model náhradní krytky digestoře Mora 5708. Pasuje celkem dobře. Tisknuto s transparentnim PETG, průhlednost vztisku dostatečná. Pro zlepšení průhlednosti stačí ztenčit tloušťku sklíčka. Současný model má 1mm, určitě bude fungovat i s…
Hexagonal Grid Upgrade – Modern & Sleek Replacement This model is easy to print and can be customized to fit your needs. Perfect for those who want to upgrade their setup with a minimalist yet stylish design. The part is pretty easy to…
I made this model to copy the male threads on the Dewalt DCE570 to make a custom attachment for a dual component system. I couldn't find the threads anywhere so I figured out how to make them in Fusion. Posting this in case someone else…
