Dewalt saw sled track saw DCS570B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your dewalt 20v saw into a track saw with this sled. Works with tracks compatible with makita track saw.
- Ocena
- 0 / 5
- Polubienia
- 63
- Pobrania
- 336
- Wydruki
- 0
- Wyświetlenia
- 3371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Turn your dewalt 20v saw into a track saw with this sled. Works with tracks compatible with makita track saw. I use mine with a powertec 71387 track. Glides nicely. Printed in PETG. Screw 2 M6x35 screws in from the bottom of the track. You do not need to thread the holes. Just forcefully thread them in since they are used as studs and do not ever need to come out. The clamp rev 1 can have M6 nuts pressed into them after printing. You can always use the regular clamp with any nuts or wing nuts. The track sled does not need supports. Print track face down. (orientation seen in the photo)
Do you like my models? Consider buying me a coffee ;-)