Dewalt saw sled track saw DCS570B
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your dewalt 20v saw into a track saw with this sled. Works with tracks compatible with makita track saw.
- Rating
- 0 / 5
- Likes
- 63
- Downloads
- 336
- Makes
- 0
- Views
- 3,371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Turn your dewalt 20v saw into a track saw with this sled. Works with tracks compatible with makita track saw. I use mine with a powertec 71387 track. Glides nicely. Printed in PETG. Screw 2 M6x35 screws in from the bottom of the track. You do not need to thread the holes. Just forcefully thread them in since they are used as studs and do not ever need to come out. The clamp rev 1 can have M6 nuts pressed into them after printing. You can always use the regular clamp with any nuts or wing nuts. The track sled does not need supports. Print track face down. (orientation seen in the photo)
Do you like my models? Consider buying me a coffee ;-)