Corsair 570x Side Panel Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This moves the glass 4mm away from the case body allowing for better airflow. In my case I had a significant drop in…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This moves the glass 4mm away from the case body allowing for better airflow. In my case I had a significant drop in temperature with the side panels removed so this helps a bit.
The rings go around the pegs on the case to push the glass out and the inserts support the glass. This uses the stock screws still.
Check out my other thing for standoffs without dust filters for the top and front. https://www.thingiverse.com/thing:4463601
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
90%
Filament: inland PLA Black
Notes:
I did 90% infill because they are small and it did not add any print time over 30%.
Category: Computer