Ninja 250 GPS speedometer handlebar mount - 52mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The speedometer on my bike wasn't working so I ordered a GPS speedometer from Amazon. The GPS speedometer requires a…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The speedometer on my bike wasn't working so I ordered a GPS speedometer from Amazon. The GPS speedometer requires a 52mm circular opening, so I designed this bracket to attach to the top of my handlebars. I discovered the display isn't readable in direct sunlight so I made the shade tube as well. The shade tube is optional.
There is an additional small tab for the button that was included with the speedo. I would have left this out, but the button resets the trip meter.
I have an 87 Ninja 250 (ex250e2) but this mount will probably work on 88-07 models as well.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Infill:
100%
Filament:
eSun ABS+
Gray
Notes:
Printed at 100% because of the tang that will be crushed under the right handlebar mount. The sun shade could probably be printed as low as 20% infill.
Category: Automotive