Ninja 250 GPS speedometer handlebar mount - 52mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The speedometer on my bike wasn't working so I ordered a GPS speedometer from Amazon. The GPS speedometer requires a…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The speedometer on my bike wasn't working so I ordered a GPS speedometer from Amazon. The GPS speedometer requires a 52mm circular opening, so I designed this bracket to attach to the top of my handlebars. I discovered the display isn't readable in direct sunlight so I made the shade tube as well. The shade tube is optional.
There is an additional small tab for the button that was included with the speedo. I would have left this out, but the button resets the trip meter.
I have an 87 Ninja 250 (ex250e2) but this mount will probably work on 88-07 models as well.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Infill:
100%
Filament:
eSun ABS+
Gray
Notes:
Printed at 100% because of the tang that will be crushed under the right handlebar mount. The sun shade could probably be printed as low as 20% infill.
Category: Automotive