DR650 Speedo Damper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement damper for the speedometer on a Suzuki DR650 motorcycle
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The stock dampers on the speedometer of my DR650 had started to flatten out, causing excessive movement of the speedometer housing. I had some TPU 95A filament, so I modeled up Version 1. Upon installing, I discovered that the 95A filament was far too stiff to install, so I modified the design to closer match the original part, which would hopefully make installation easier. These were still fairly difficult to install, requiring a lot of pressure and poking/prodding to get the damper installed in the bracket, but they fit well and restore the amount of play in the original mount.
Printing version 1 is not recommended unless you're using a much softer filament than 95A.