DR650 Speedo Damper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement damper for the speedometer on a Suzuki DR650 motorcycle
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
The stock dampers on the speedometer of my DR650 had started to flatten out, causing excessive movement of the speedometer housing. I had some TPU 95A filament, so I modeled up Version 1. Upon installing, I discovered that the 95A filament was far too stiff to install, so I modified the design to closer match the original part, which would hopefully make installation easier. These were still fairly difficult to install, requiring a lot of pressure and poking/prodding to get the damper installed in the bracket, but they fit well and restore the amount of play in the original mount.
Printing version 1 is not recommended unless you're using a much softer filament than 95A.