Counting matching models…
This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…
Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.
This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…
Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.
Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.
Speedometer for pedal car or another toy. Designed to fasten to car with a zip tie.
Untere Tachometerhalterung für E-Bike BXB-75 und vielleicht auch für andere . Das ist mein erster Versuch etwas selbständig zu kreieren , bitte seid nachsichtig mit mir . Es wurde auch nur mit Tinkercad erstellt ,da ich mich mit CAD nicht…
Колпачок для спидометра ГАЗ, Cap for GAZ speedometer
I installed HDB handguards on my 2019 690, and it caused interference between the front brake lines and where my speedo was mounted on the Lynx fairing dash. The first part is a bracket (print x2) that bolts onto the HDB handguard bar…
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
Speedometer cap replacement for Polaris (sportsmann 2006). The speedos on these are known to fail so instead of buying a new speedo you can just print a cap to keep water out. Made it possible to zip-tie loose cables to the backside of…
Speedometer cable holder for YAMAHA XT 600 Designed for most YAMAHA XT DT motorcycles
console for the mount of a Sigma BC 14.0 speedometer you may change the angle within Sketch001
Got fed up with the low battery life with the CR2016, so I made a bigger cavity in the lid to hold a CR2032 battery. Has no grove for the rubber gromit, but should still work. Print Settings Printer Brand: Creality Printer: Ender 3…
This is the enclosure for an open source speedometer for motorcycles that I am working on. The speedometer uses a 20x4 hd44780 character LCD for a display, and is powered by an Arduino nano. Various other small breakout boards make up the…
VW LT Speedometer pinion 281957821G (Z=18) Designed but never used! Print and use in car on your own risk! Also if you scale up it looks good as an ornament on a desk.
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
This mount was specifically designed for a Koso EX-02 universal speedometer to fit onto a Yamaha TW200 Trailway. The challenge was getting the shape of the Koso speedometer to fit into the opening. It took a number of iterations but this…
Bracket I made in Blender because my speedometer didn't come with one. Test print with SUNLU PLA meta. Creality Ender 3 v3 SE. 0.16mm layer height. 0.4mm nozzle. Bed temp set at 65 and nozzle at 190, 80% print speed. 2x skirt loops and…
I engine-swapped my KZ200 and the new engine doesn't have a cable tach output, so I pulled the tach apart to make a clock. A lot of 70s and 80s Japanese motorcycles use Nippon Seiki instruments, and of those a lot are the same size. If…
My original clips disappeared so long ago that I don't even remember what they look like. This clip was modeled to look somewhat similar to other clips on the bike. Only tested on my 2009 Triumph America, but likely works on other…
Purpose: Track hedgehog health/activity and reward him for running with mealworms. Disclaimer: Mealworms have unfavorable Ca:P ratios so either feed calcium gut-loaded mealworms or other treats that are good for their health How: Wireless…
Should be printed with PC and 0.25 nozzle, i used 5 perimeter and gyroid infill. The module for the gear is 0.8 and it has 21 teeth.
This a speedo mount to fit on a an R6 Forks. I believe this would fit on a R1 and similar years too. The boss for the ignition key has been cut off to fit this. This fits a 85mm or 3 3/8" Gauge, the one I specifically have is a “Motor…
In case you break it- I created a mount for attaching a speedometer/throttle to an electric scooter Ruima/Speedway 4 Mini Pro. I hope you find it useful.
This dashboard cover is designed for the KTM 790 Duke . It protects the speedometer display against scratches, dust, and direct sunlight, while providing a clean look that integrates perfectly with the bike. ✅ Compatible with KTM 790 Duke…
About See what it looks like here: https://www.youtube.com/shorts/_z8Omeqew1A NOTE: YOU NEED TO BE COMFORTABLE WITH WIRING AND MODIFYING YOUR ELECTRICAL SYSTEM FOR THIS MOD. I AM NOT RESPONSIBLE IF IT GOES WRONG FOR YOU OR YOU RUIN YOUR…
Arduino Digital Speedometer for Razor A5 Lux Kick Scooter Transform your kid's Razor A5 Lux Kick Scooter into a high-tech ride with this Arduino-based digital speedometer! This project combines a classic analog speedometer display with…
Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.
This is a speedometer for your bicycle - powered by an Arduino Nano. It uses a linear Hall effect sensor mounted on the front shock absorber and a magnet mounted on the front wheel in order to count the revolutions of the wheels. Using…
ESP32 (Arduino) Based Bicycle Computer with GPS and SD logging This is still work in progress but mostly functional this far. The code and mechanical aspects of the project definitely work well enough for a daily usage scenario.…
Bontrager Elite Speedometer holder to be used in bicycle frame
Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.
Speedometer for pedal car or another toy. Designed to fasten to car with a zip tie.
Note: I only have the rectangular screen CDIS, I haven't tried this for the round screen version. If you had to replace the screen on your CDIS (Central Driver Information System, the StreetScooter speedometer), you had to remove the…
Ball Bearing Speedometer frame. Needs two photodiodes, two LEDs (Amazon sells packs with both of these), an Arduino or similar microcontroller, two 10M resistors, and two 220 ohm resistors. The frame should print with no supports,…
Untere Tachometerhalterung für E-Bike BXB-75 und vielleicht auch für andere . Das ist mein erster Versuch etwas selbständig zu kreieren , bitte seid nachsichtig mit mir . Es wurde auch nur mit Tinkercad erstellt ,da ich mich mit CAD nicht…
Created a mount for the Timewise 825 speedometer. Print solid in high temp plastic like ABS since it may be in the sunlight. Top pivots on a 1/8 inch shaft. The knob rotates on a 1/4 inch shaft that is tapped almost all the way through…
This is for the little clip that holds the speedo cable to the back of the instrument cluster. The original clip is very brittle. All that is needed is four m3 size bolts to secure the halves together.
I neede some simple and decent looking cover to provide shade for speedometer on my Honda CL500, so I made this. It can be tightented by self tapping screw, but I tested it without it and it holds firmly even in higher speeds. Printet…
Clips onto the bottom lip of the speedometer on an R56 mini. Phone charger can be stuck to it. Made for car with satnav, may work without.
My odo wasn't working because metal spring circlip was loose so I solve. There's 2 model one of them is just shim, because internal gauge mechanism lifts by 2mm. If odometer teeth still loose you can heat and bend clip part. I recommend…
MZ Dashboard Lite is a free DIY Sim Racing dashboard featuring a real moving speedometer, fuel warning indicator, and shift light support. Designed for SimHub and Arduino Nano, this compact dashboard is easy to build, inexpensive, and…
Tachogehäuse für Simsonmopeds mit 60mm Durchmesser Tacho Speedometer housing for Simson with 60mm diameter
Yamaha Jog SA-12 Speedometer Gear (16T) Replacement speedometer helical gear for Yamaha Jog SA-12. Designed for high durability and a precise fit. Successfully tested in real-world conditions after being printed with Nylon. Technical…
This was made for a school project upgrading the quadracyle to an electric gokart
Phone Holder for MiniCooper F55. Found in the Thingiverse, but now is no longer available. Useful to recicle old magnetic phone holders. Two pieces that bolted to the speedo meter, let the phone in a comfortable place to use navigation…
This is a cap for Honda CBR speedometer gear. Designed for CBR600F2, but i think that same gear is used on other Hondas too. This may come handy when using an aftermarket speedometer and speedometer cable is removed. Print Settings…
The speedometer on my bike wasn't working so I ordered a GPS speedometer from Amazon . The GPS speedometer requires a 52mm circular opening, so I designed this bracket to attach to the top of my handlebars. I discovered the display isn't…
Printed in PETG with 0.2 mm nozzle. Tested for ca 1500 km with no problems. The fit might be a bit tight and require some sanding on the axle, depending on the printer.
A gasket for a CT90 with the D-shaped speedometer. I used TPU to print it. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Matter Hacker TPU Black Category: Automotive
This is a replacement speedometer screw i made for my dad. The scew is available with 7 and 8 threads. In addition I added a version with a smaler bridge and a slightly elevated bridge, whitch fits into the opposite sides hole (at least…
The problem The magnet of the electric bike of my father-in-law used to rotate on the spoke it was attached to by the default single-screw mechanism (see picture below) causing the speed controler of the motor to malfunction (for anyone…
The speedometer I bought had a too big distance to the magnet and therefore didn't work sometimes. I designed a tool to fix that problem. If your bicycle has slightly other dimensions, adapt it in the first sketch of the f3d - file. I…
Replica of speedometer for Jawa 250 and 350 motorcycles. 120kmh and 140kmh variant.
Replacement gear for BMW R1150GS speedometer drive - BMW RealOEM number 62122306287. There is probably no official replacement part of the plastic drive, so I took the original one and re-modeled it. Please note that dimensions of the…
I made a groove for putting in a o-ring under the glass. And the top-lid is pressed on and is putting pressure on the glass and oring. There is also a groove underneath the body, and the plan was to print a gasket in TPU, but the TPU a…
The original mount for the speed sensor of my Sigma BC 14.16 STS CAD speedometer has a very small joint. While being mounted on the front suspension strut of my velomobile, it broke… The replacement sensor is now glued onto my new holder.…
This lid was printed with PLA, however, i recommend using PETg or ABS cause its going to bend up when sunlight hits on it. My friend wanted it to look exactly as the original part was so he sanded it up and then did it a paint job.…
Dashboard with speedometer and tachometer for SCARBO SVF1 Race Car Model
This is the case for an Arduino speedometer I made with random stuff I had laying around during quarantine last year. It assumes the tire size is a standard road bike tire on a standard road bike wheel. The code can be edited to specify a…
Small cover to diffuse light from the bulbs. The originals were melted. I've included the Fusion 360 file in case you want to modify it. See the video below for more info.
Cut the existing needle off of the black round piece and glue this on. The original needle is made from a different plastic so they should separate easily with an exacto knife. I would only suggest "VW_Bus_Speedo_needle" for abs or…
These toy gauge dials are my own design, however, the overall gift idea is not original to me. Check out this video for a quick understanding of their intended use. SHOPPING LINKS FOR MATERIALS: Steering Wheel set of 4 —…
Bike speedometer helical gear fitted in Suzuki TS50/X/W (SA1A). the helical gear is 23R@45 and module of 0.8mm.
Speedometer Clock Inspired by analog dials of a retro motorcycle. It shows time in hours and minutes in a pair dials which resembles a tachometer and speedometer. The time is fetched from the Time Server and constantly updates it. The…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
I purchased this speedometer from Aliexpress, though I could see that the mounting points were the same for a dozen generic models of motorcycle speedometers. The bracket it came with wouldn't work in the spot I wanted to mount it, needed…
Replacement gears for PAL speedometer/odometer often found on old SKODA cars and JAWA and CZ motorcycles. Print in ABS. <0.4mm nozzle recommended Enjoy! Category: Replacement Parts
This is a used speedometer cover designed for a forty-year-old Simson motorcycle. It provides protection and housing for the speedometer, ensuring its durability and functionality while adding a vintage touch to your bike.
Initial Try, no long term proof jet Dimension: Gear - see picture. Outer Dimensions reduced by 0.2mm Fin - outer length 15mm, height 6mm Zylinder (without gear and fin) - inner diameter 25.1mm , outer 29.6mm, 8.3mm I printed it with PLA…
this can hold a veypor and two toggle switches. good for heated grips and heated seat switches you need some m6 nylock nuts and some m6 bolts, cant remember the size this fits right between the handle bar clamps on my drz400E. Category:…
I admit that its assembly is quite complicated, but once installed it will close the hole perfectly, given that it incorporates the gasket very well. I recommend printing it with 100% infill and using support material and brim. PLA should…
Introduction I liked the idea and the look of Oogway´s Speedometer Clock but i don´t liked the printed watch face, because i don´t get it printed nicely. So i decided to make a remix for a plotted watch face. The idea was to create a…
