StreetScooter CDIS / Speedometer mounting clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the plastic clips with M3 bolts
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Note: I only have the rectangular screen CDIS, I haven't tried this for the round screen version.
If you had to replace the screen on your CDIS (Central Driver Information System, the StreetScooter speedometer), you had to remove the original plastic clips holding the CDIS to the dashboard. Because those break in the process, here is an alternative using heatset inserts and M3 bolts. If I were to rate it myself, I would give it three stars, since it does the job, but neither very elegantly nor does it fit very well. It might well be that the holes in your dashboard are drilled differently and these clips won't fit at all.
To do this yourself, print the model in the shown orientation and insert the heatset insert as in the pictures.
On another note: If you find this while searching a replacement screen for your CDIS, look for one of these screens:
PH800480T024-IHA (original)
PH800480T033-IHA (untested)
PH800480T030-ZHA01 (apparently improved, works)
They all follow the "ACT I3" standard by German Company "Actron". Of course, the replacement screen needs to have the same physical and logical dimensions.