10 inch rackmount - ASUS NUC 14 Essential (Updated!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10" rackmounts for the ASUS NUC 14 Essential with two keystone slots
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 1003
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a fitted 10" rackmount for the ASUS NUC 14 Essential.
It has cutouts for ventilation as well as M3 screws if you want to affix the PC to the mount.
Required hardware:
Screws and cage nuts that came with your cabinet, nothing else.
Current variations:
Fitted version for the EQ14 with two Keystones, Both on the right side, intended for passthrough of USB, but could fit any Keystone of course.
Fitted version for the EQ14 without Keystones and centered, made at request
Printing instructions:
Strength at your discretion. I printed with the following settings:
- 3 perimeters
- 25% infill
- Gyroid
- PETG (for heat resistance)
Print either flat or on its face. Flat should give better structural integrity in terms of layer orientation. I have printed mine standing on it's face in order to get the textured plate pattern on the front.
Will fit a Prusa MK3/4/Core One if you place it with its face down.