1 / 4
Servo Ball Valve, 1/2" Drip Irrigation Tubing — zdjęcie 1
1 / 4

Servo Ball Valve, 1/2" Drip Irrigation Tubing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use MG996/995 servo to control on/off ball valve used for 1/2 inch (14 mm) drip irrigation tubing or other water line

Ocena
0 / 5
Polubienia
9
Pobrania
31
Wydruki
0
Wyświetlenia
391
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Use MG996/995 Servo to control on/off ball valve used for 1/2 inch drip irrigation tubing or other water line.

I used this valve https://www.amazon.com/dp/B0CQXKJ26B

Need hose clamp to prevent leakage. 

Tested with MG996 servo. https://www.amazon.com/dp/B09LS7RB5J

Trim ends of dual servo horn for insertion/attachment to small gear. 

A 180 degree sweep gives a ¼  valve rotation. Power was about 250 ma at 5V when turning. 

Printed with PLA and PETG, 0.16mm layer height. 

Need M3x20 mm bolts.

Glued valve knob to large gear for added stability.  Used Cyanoacrylate

Similar version for ¼ inch drip tubing https://www.printables.com/model/1290893-servo-ball-valve-for-drip-irrigation-or-water-shut

 

Tagi