Sewing Pattern Weight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pattern/fabric weight for sewing projects based on a 5/8" flat washer
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 449
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This sewing pattern weight is printed around two 5/8" flat washers, adding heft to help keep your pattern in place. The print should be paused in order to enclose the washers.
Extra Materials
- 5/8" Flat Washers (two per pattern weight). These should have a 1 ¾" outer diameter and a 9/64" thickness (e.g. https://www.lowes.com/pd/Hillman-0-625-in-x-Zinc-Plated-Standard-SAE-Flat-Washer)
Special Instructions
The print should be paused at roughly 7.5mm in order to insert two flat washers into the print. When printed at 0.15mm layer height, this occurs at layer 50
Optional Instructions
The surface finish on the example photos is achieved by using a “Octagram Spiral” top and bottom infill pattern. Play with different infill patterns to see if they give you a result you like.
The example was printed with a 0.15mm layer height on a 0.40 nozzle.