Liczymy pasujące modele…
English: This model allows you to create a stunning quilted effect for cake decorations, similar to the design featured in high-end wedding or celebration cakes. The pattern replicates a diamond-tufted texture, with each diamond measuring…
Binding Wheel used to roll and hold lengths of binding while quilting. The slot in the roller can accommodate binding up to 2.5" width. The wheels use standard 608 bearings for smooth dispensing of the binding as needed. This is my first…
A 3D printed quilt square is a small, tile-like piece designed to replicate or reinterpret traditional quilt patterns us
This is a 45/90 degree triangle template for quiltmakers, with ruler markings for inches, 1/2 inches and 1/4 inches. It is about 3/16 inch thick. A friend of my wife requested this, and I saw it as an interesting challenge. It was…
Modeled up a bunch of these at the request of a quilter; sharing here for others to use. Bloc_Loc rulers are used for making half square triangles. FreeCAD file included if you need to make a custom size.
Full set of Bloc Loc Flying Geese rulers; modeled these up for a quilter. The actual template size is half an inch bigger than the listed sizes (finished size). FreeCAD file included for making custom sizes.
I made these templates for my wife to make it easier for her to cut them out with a rotary cutter. You can print them or cut them on a laser engraver. You will need to print 4 of the dbl wed ring lower file and glue them together with CA…
Quilting Templates in two sizes, 6 inch and 3 inch. I don't know anything about quilting, someone asked me to make these and they seem satisfied.
The stencil is intended for a tree skirt and is a nice size, measuring approximately 46 inches at the widest point.
English: This model allows you to create a stunning quilted effect for cake decorations, similar to the design featured in high-end wedding or celebration cakes. The pattern replicates a diamond-tufted texture, with each diamond measuring…
Template for cutting the pieces of a 5 point star, with a 1/4" seam allowance. Makes a 14" block when fully assembled. It prints bottom side up to allow for the nubs that grip the fabric.
Quilting template for 6.5 inch (outer) and 4.5 inch (inner) squares with 1/4 inch stitch markers. Outer notches are for marking your ¼" stitches for the 6.5" pattern and inner white hash marks are for the inner 4.5" template.
Nice and stable holder for various quilting and sewing rulers and guides and templates. Will even hold quite tall acrylic templates. I recommend printing with 10 or more bottom layers (to add more weight down low) and higher than normal…
Just some quilting templates my wife had me make for her friend.
A modified roller for this Quilting hand tool, great design The original is here: https://www.printables.com/model/872351-roll-press-quilting-tool-rodillo-prensatelas
Use this plate with your Singer sewing machine to be able to freely move the fabric while sewing. This fits my good ol' Singer 155 Anniversary that doesn't have a latch to lower the feed dogs, but this might fit other Singer sewing…
Needed to replace an old threaded suction cup on a Quilting ruler handle and couldn't find any to fit so I came up with this. fits most suction cups with the slot on the top you can find most anywhere. Thread fits .3750-16 inch which…
I created a bolt with an M20-compatible thread and a wide and flat head to build fabric weights for my kitemaking projects. The Nut Job script for OpenSCAD makes this a very easy task. I added thin adhesive felt pads underneath to protect…
This is a diamond ruler for cutting 2.5in tall trapezoids, based on the pattern by Krista Moser https://www.kristamoser.com/_files/ugd/a51756_6b2f2b5b9f72496aaed055b916556b85.pdf The clear acrylic version with all the dimensions on it is…
Simple quilting/sewing ruler rack shaped like a spool of thread. Holds 9 rulers of 0.135in or 3.5mm thickness 10degree angle backwards so rulers rest nicely 5x5in base
Originally a ruler holder designed for TB Crafts, they have generously allowed for the model to be shared with the wider world. The design is a simple quilting ruler holder that can store up to 8 quilting rulers. I have included both…
My wife asked me to make her a seam roller, so you might as well have it as well! Barrel is 25mm (~1 inch) wide and 25mm diameter, grip is a rectangular profile, so it's not super ergonomic, but it takes pressure well. Rather than have to…
My wife wanted an ORT (Old Ratty Thread) basket for her sewing table. This is an initial design to meet that need. It is comprised of two main pieces: a bracket that clamps onto the sewing table and the ORT basket itself. The bracket is…
Spiral template used for a long arm quilting machine. You insert the guide pin from the machine into the template and trace the design. I have printed this in PLA as it was quick and easy and does not require more durable filaments as…
Printing in regular PLA. 2 walls, 15% infill. 0.4mm nozzle. No brim needed to print.
Binding Wheel used to roll and hold lengths of binding while quilting. The slot in the roller can accommodate binding up to 2.5" width. The wheels use standard 608 bearings for smooth dispensing of the binding as needed. This is my first…
Quilting 5" circle template....because my wife couldn't find a 5" plate :) She uses it with a," Bohin chalk pencil with 0.9mm refills", to mark fabric for fussy cuts. The 3D model file http://a360.co/2yBmXSD Print instructions Category:…
A 3D printed quilt square is a small, tile-like piece designed to replicate or reinterpret traditional quilt patterns us
This is a 45/90 degree triangle template for quiltmakers, with ruler markings for inches, 1/2 inches and 1/4 inches. It is about 3/16 inch thick. A friend of my wife requested this, and I saw it as an interesting challenge. It was…
A unique 3D printable creation — this Quilting Template Storage Binder Pages, Clear Pockets, Organized Patterns Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
Another design for my wife for sewing . 4 1/2" template. Real sturdy with the g-code here.
Modeled up a bunch of these at the request of a quilter; sharing here for others to use. Bloc_Loc rulers are used for making half square triangles. FreeCAD file included if you need to make a custom size.
Full set of Bloc Loc Flying Geese rulers; modeled these up for a quilter. The actual template size is half an inch bigger than the listed sizes (finished size). FreeCAD file included for making custom sizes.
The templates included are for drunkard's path blocks ranging from 1" to 6" finished, with a 1/4" seam allowance. These templates can be printed in PLA and hold up well to being cut around with a small rotary cutter. Alternately you can…
Two inch quilting hexagon with 4 holes for stitching and 3/4 inch hexagon for quilting. Designed for my wife who was wanting more options for the hexagon. Remix from
Some templates for cutting quilting pieces. They come from an OnShape document with configuration parameters that can output rectangles and polygons. That project is here:…
Works with all standard quilting rulers, pics are of Omnigrid rulers.
This creates a set of nested quilting templates with standard 1/4" cutting margins based on a basic hex tile of a dimension you specify. The templates have a fillet edge (specifiable) to make it harder for cutting blades to destroy the…
Parametric Quilting Templates for cutting fabric. Modeling in Fusion 360. The values in the Fusion 360 file and STL files are in millimeters, but the files are named in inches. Seam allowances are NOT included in the measurements. Add…
My wife asked me to make these, the basic straight one costs $20 in the store. Test them out and see how they work, my wife's quilting foot creates an ugly line with 40mm, but works fine with 20mm. They are pretty easy to design in…
My grandmother had a part break on her quilting machine and no one makes or sells replacement parts. This is a replace piece for the ratching side. One version is solid the other has a hole into the part that broke to make the size of…
my wife needed a 5.5" template to cut out squares, I downloaded one and it had sharp edges on the handle so she didn't like it. So I fired up fusion and made one for her. It takes about 2 hours to print on a Kobra Max. Also you can scale…
You can buy a 20 pack of quilting clamps (or quilting clips?) off Amazon for $20. I didn't need 20 for my project--I only needed about 5. So I designed and printed these. In PLA, they've got a decent amount of flex, and seem to work ok.…
These are Hex templates for cutting and the final dimensions for Hex-shaped quilting blocks, the templates include a ¼" seam allowance outer ring. I generated these for my wife to use in her quilting. Templates include size on both the…
My wife was after some simple quilting template squares for a simple 3" and 6" quilt (and 4" + 8") these templates are 3", 4", 6" and 8" squares showing you the quilt cut pattern, they include a ¼" seam allowance around each edge to…
This quilt template gives you a B-Fan pattern to put onto you hand stitched quilt. Alignment holes to use when moving the template.
This model has two pieces used to make melon patch designs for quilting. Mark the outer perimeter for a cut line on your fabric and a ¼ inch seam allowance dashed line for sewing. This template helps keep your melon patches uniform.
One of the corners of my mother's SuperFrame quilting frame corners has been broken for 10+ years, and it had been ridiculously expensive and nigh on impossible to find replacements for it due the brand no longer being in production (as…
I made these templates for my wife to make it easier for her to cut them out with a rotary cutter. You can print them or cut them on a laser engraver. You will need to print 4 of the dbl wed ring lower file and glue them together with CA…
Templates for a Baby size quilt with the double wedding ring pattern You can print them or use a laser engraver to cut them. Same as the larger version of templates but no gluing is needed.
A stand for some of the smaller quilting rulers. One, two, or three will fit per slot. Print on end with solid side. It shouldn't need a brim. If you print two of them they will hold longer rulers horizontally. Update: added upright stand…
I liked the simple elegance of @cmarciales closure, but tweaked it to fit slightly larger rolls and to slot rolls more easily. The texture serves no function beyond giving it a more polished feel. Just squeeze the sides to release the…
A small hook designed for holding quilting rulers on the Honeycomb Storage Wall system. Requires the insert-empty from https://www.printables.com/model/152592-honeycomb-storage-wall/files
My wife was looking for a very specific style quilting/quilt square rules and nothing seemed to cut it. We found a few different ones that were only about 50% of the way there so decided to start from scratch with what she wanted. The…
This is a set of simple Quilting Templates. This set includes: Quilting 6.5in Triangle Quilting 2.5in Triangle Quilting 6.5in Half Triangle Quilting 2.5in Half Triangle Quilting 2.5in Diamond
My wife is a quilter, which means she has to sew a "binding" around the edge of each quilt to finish it up. Many of the quilts are very large so she has tens of feet of binding to manage as she’s sewing it on. I designed and 3D printed a…
Simple two piece device to fold fabric for quilt sashes. The “Sasher_Combo_Top” will handle two sizes of fabric, 2.5" or 2.75". When the top piece is snapped into the “Sasher_Bottom” it will form two slots to guide the folded fabric, and…
A simple Roll & Press Quilting Tool, with two bearing 608zz and 2 screws M3, it work perfect for the hobby of my wife. The only special information is i print the principal piece in vertical orientation. I add the freecad file for…
Two different styles of celtic knots to be used as stencils for quilting.
